[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 4 of 5 [Info / IDSN]
Previous Document: I.15 How will the parallel port on the modems work?
Next Document: I.17 Can the second port be used for other purposes?
-
Search the FAQ Archives
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 4 of 5 [Info / IDSN]
Previous Document: I.15 How will the parallel port on the modems work?
Next Document: I.17 Can the second port be used for other purposes?
I.16 What is the benefit of the using the parallel port?
-------------------------------------------------------------------------------- Joe Gray (jgray@onramp.net) wrote: : Brent, what kind of speed difference can I expect between the serial port : at 115K (assume 16550 UARTs) and the parallel port? I know that : theoretically the parallel should be faster, but what about in real life? brentm@zyxel.com (Brent Mosbrook) writes: The speed is not the most important factor.. reliability and reduced CPU load are the primary reasons to run the parallel driver.
Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 4 of 5 [Info / IDSN]
Previous Document: I.15 How will the parallel port on the modems work?
Next Document: I.17 Can the second port be used for other purposes?
Part1 - Part2 - Part3 - Part4 - Part5 - Single Page
[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
Send corrections/additions to the FAQ Maintainer:
rwong@direct.ca (Robert Wong Jr.)
Last Update October 22 2009 @ 05:27 AM