[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
    Search the FAQ Archives

Part1 - Part2 - Part3 - Part4 - Part5 - Single Page

Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 3 of 5 [Technical FAQs]
Previous Document: T.4 What kind of power supply is used?
Next Document: T.6 How do ZyXEL modems deal with escape sequences?


T.5 Are ZyXEL modems Hayes-compatible?


--------------------------------------------------------------------------------

Yes, ZyXEL modems are Hayes-compatible.  ZyXELs use the same basic AT command 
set used in the 2400 baud Hayes Smartmodems.

ZyXELs have an enlarged and enhanced AT command set in addition to the basic AT 
commands common to the 2400 baud Hayes Smartmodems.  These additional commands 
deal with higher baud rates, fax settings, voice settings, and other features
that were not present in the original AT command set of 2400 baud Hayes 
Smartmodems.




Top Document: ZyXEL modem FAQ List v4.2, Nov 20 1995, Part 3 of 5 [Technical FAQs]
Previous Document: T.4 What kind of power supply is used?
Next Document: T.6 How do ZyXEL modems deal with escape sequences?

Part1 - Part2 - Part3 - Part4 - Part5 - Single Page


[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
rwong@direct.ca (Robert Wong Jr.)

Last Update October 22 2009 @ 05:27 AM

Some parts © 2009 Advameg, Inc.