faqs.org - Internet FAQ Archives

RFC 2971 - IMAP4 ID extension


Or Display the document by number




Network Working Group                                        T. Showalter
Request for Comments: 2971                                Mirapoint, Inc.
Category: Standards Track                                    October 2000

                           IMAP4 ID extension

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2000).  All Rights Reserved.

Abstract

   The ID extension to the Internet Message Access Protocol - Version
   4rev1 (IMAP4rev1) protocol allows the server and client to exchange
   identification information on their implementation in order to make
   bug reports and usage statistics more complete.

1. Introduction

   The IMAP4rev1 protocol described in [IMAP4rev1] provides a method for
   accessing remote mail stores, but it provides no facility to
   advertise what program a client or server uses to provide service.
   This makes it difficult for implementors to get complete bug reports
   from users, as it is frequently difficult to know what client or
   server is in use.

   Additionally, some sites may wish to assemble usage statistics based
   on what clients are used, but in an an environment where users are
   permitted to obtain and maintain their own clients this is difficult
   to accomplish.

   The ID command provides a facility to advertise information on what
   programs are being used along with contact information (should bugs
   ever occur).

2. Conventions Used in this Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

   The conventions used in this document are the same as specified in
   [IMAP4rev1].  In examples, "C:" and "S:" indicate lines sent by the
   client and server respectively.  Line breaks have been inserted for
   readability.

3. Specification

   The sole purpose of the ID extension is to enable clients and servers
   to exchange information on their implementations for the purposes of
   statistical analysis and problem determination.

   This information is be submitted to a server by any client wishing to
   provide information for statistical purposes, provided the server
   advertises its willingness to take the information with the atom "ID"
   included in the list of capabilities returned by the CAPABILITY
   command.

   Implementations MUST NOT make operational changes based on the data
   sent as part of the ID command or response.  The ID command is for
   human consumption only, and is not to be used in improving the
   performance of clients or servers.

   This includes, but is not limited to, the following:

      Servers MUST NOT attempt to work around client bugs by using
      information from the ID command.  Clients MUST NOT attempt to work
      around server bugs based on the ID response.

      Servers MUST NOT provide features to a client or otherwise
      optimize for a particular client by using information from the ID
      command.  Clients MUST NOT provide features to a server or
      otherwise optimize for a particular server based on the ID
      response.

      Servers MUST NOT deny access to or refuse service for a client
      based on information from the ID command.  Clients MUST NOT refuse
      to operate or limit their operation with a server based on the ID
      response.

   Rationale: It is imperative that this extension not supplant IMAP's
   CAPABILITY mechanism with a ad-hoc approach where implementations
   guess each other's features based on who they claim to be.

   Implementations MUST NOT send false information in an ID command.

   Implementations MAY send less information than they have available or
   no information at all.  Such behavior may be useful to preserve user
   privacy.  See Security Considerations, section 7.

3.1. ID Command

   Arguments:  client parameter list or NIL

   Responses:  OPTIONAL untagged response: ID

   Result:     OK    identification information accepted
               BAD   command unknown or arguments invalid

   Implementation identification information is sent by the client with
   the ID command.

   This command is valid in any state.

   The information sent is in the form of a list of field/value pairs.
   Fields are permitted to be any IMAP4 string, and values are permitted
   to be any IMAP4 string or NIL.  A value of NIL indicates that the
   client can not or will not specify this information.  The client may
   also send NIL instead of the list, indicating that it wants to send
   no information, but would still accept a server response.

   The available fields are defined in section 3.3.

   Example:  C: a023 ID ("name" "sodr" "version" "19.34" "vendor"
                 "Pink Floyd Music Limited")
             S: * ID NIL
             S: a023 OK ID completed

3.2. ID Response

   Contents:   server parameter list

   In response to an ID command issued by the client, the server replies
   with a tagged response containing information on its implementation.
   The format is the same as the client list.

   Example:  C: a042 ID NIL
             S: * ID ("name" "Cyrus" "version" "1.5" "os" "sunos"
                  "os-version" "5.5" "support-url"
                  "mailto:cyrus-bugs+@andrew.cmu.edu")
             S: a042 OK ID command completed

   A server MUST send a tagged ID response to an ID command.  However, a
   server MAY send NIL in place of the list.

3.3. Defined Field Values

   Any string may be sent as a field, but the following are defined to
   describe certain values that might be sent.  Implementations are free
   to send none, any, or all of these.  Strings are not case-sensitive.
   Field strings MUST NOT be longer than 30 octets.  Value strings MUST
   NOT be longer than 1024 octets.  Implementations MUST NOT send more
   than 30 field-value pairs.

     name            Name of the program
     version         Version number of the program
     os              Name of the operating system
     os-version      Version of the operating system
     vendor          Vendor of the client/server
     support-url     URL to contact for support
     address         Postal address of contact/vendor
     date            Date program was released, specified as a date-time
                       in IMAP4rev1
     command         Command used to start the program
     arguments       Arguments supplied on the command line, if any
                       if any
     environment     Description of environment, i.e., UNIX environment
                       variables or Windows registry settings

   Implementations MUST NOT use contact information to submit automatic
   bug reports.  Implementations may include information from an ID
   response in a report automatically prepared, but are prohibited from
   sending the report without user authorization.

   It is preferable to find the name and version of the underlying
   operating system at runtime in cases where this is possible.

   Information sent via an ID response may violate user privacy.  See
   Security Considerations, section 7.

   Implementations MUST NOT send the same field name more than once.

4. Formal Syntax

   This  syntax is intended to augment the grammar specified in
   [IMAP4rev1] in order to provide for the ID command.  This
   specification uses the augmented Backus-Naur Form (BNF) notation as
   used in [IMAP4rev1].

     command_any ::= "CAPABILITY" / "LOGOUT" / "NOOP" / x_command / id
         ;; adds id command to command_any in [IMAP4rev1]

     id ::= "ID" SPACE id_params_list

     id_response ::= "ID" SPACE id_params_list

     id_params_list ::= "(" #(string SPACE nstring) ")" / nil
         ;; list of field value pairs

     response_data ::= "*" SPACE (resp_cond_state / resp_cond_bye /
         mailbox_data / message_data / capability_data / id_response)

5. Use of the ID extension with Firewalls and Other Intermediaries

   There exist proxies, firewalls, and other intermediary systems that
   can intercept an IMAP session and make changes to the data exchanged
   in the session.  Such intermediaries are not anticipated by the IMAP4
   protocol design and are not within the scope of the IMAP4 standard.
   However, in order for the ID command to be useful in the presence of
   such intermediaries, those intermediaries need to take special note
   of the ID command and response.  In particular, if an intermediary
   changes any part of the IMAP session it must also change the ID
   command to advertise its presence.

   A firewall MAY act to block transmission of specific information
   fields in the ID command and response that it believes reveal
   information that could expose a security vulnerability.  However, a
   firewall SHOULD NOT disable the extension, when present, entirely,
   and SHOULD NOT unconditionally remove either the client or server
   list.

   Finally, it should be noted that a firewall, when handling a
   CAPABILITY response, MUST NOT allow the names of extensions to be
   returned to the client that the firewall has no knowledge of.

6. References

   [KEYWORDS]  Bradner, S., "Key words for use in RFCs to Indicate
               Requirement Levels", RFC 2119, March 1997.

   [IMAP4rev1] Crispin, M., "Internet Message Access Protocol - Version
               4rev1", RFC 2060, October 1996.

   [RFC-822]   Crocker, D., "Standard for the Format of ARPA Internet
               Text Messages", STD 11, RFC 822, August 1982.

7. Security Considerations

   This extension has the danger of violating the privacy of users if
   misused.  Clients and servers should notify users that they implement
   and enable the ID command.

   It is highly desirable that implementations provide a method of
   disabling ID support, perhaps by not sending ID at all, or by sending
   NIL as the argument to the ID command or response.

   Implementors must exercise extreme care in adding fields sent as part
   of an ID command or response.  Some fields, including a processor ID
   number, Ethernet address, or other unique (or mostly unique)
   identifier allow tracking of users in ways that violate user privacy
   expectations.

   Having implementation information of a given client or server may
   make it easier for an attacker to gain unauthorized access due to
   security holes.

   Since this command includes arbitrary data and does not require the
   user to authenticate, server implementations are cautioned to guard
   against an attacker sending arbitrary garbage data in order to fill
   up the ID log.  In particular, if a server naively logs each ID
   command to disk without inspecting it, an attacker can simply fire up
   thousands of connections and send a few kilobytes of random data.
   Servers have to guard against this.  Methods include truncating
   abnormally large responses; collating responses by storing only a
   single copy, then keeping a counter of the number of times that
   response has been seen; keeping only particularly interesting parts
   of responses; and only logging responses of users who actually log
   in.

   Security is affected by firewalls which modify the IMAP protocol
   stream; see section 5, Use of the ID Extension with Firewalls and
   Other Intermediaries, for more information.

8. Author's Address

   Tim Showalter
   Mirapoint, Inc.
   909 Hermosa Ct.
   Sunnyvale, CA 94095

   EMail: tjs@mirapoint.com

9.  Full Copyright Statement

   Copyright (C) The Internet Society (2000).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: