Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

comp.sys.hp.hpux FAQ
Section - 5.15.2.9 Why do NCD X-terminals hang when trying to connect via XDMCP to an HP-UX 10.20 host running CDE?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Schools ]


Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.15.2.8 How do I get cut-n-paste to work correctly with CDE?
Next Document: 6.1 General
See reader questions & answers on this topic! - Help others by sharing your knowledge
Updated: 04/09/01

This is probably a language negotiation problem.  Copy the file
/usr/dt/config/Xconfig into /etc/dt/config, then edit it.  Find the bit
that reads:

##########################################################################
   #  To specify a default language for the display.
   #
   #  Dtlogin*language:          <lang>

and modify it so it looks something like:

##########################################################################
   #  To specify a default language for the display.
   #
   #  Dtlogin*language:    <lang>
   Dtlogin*language: en_GB.iso88591

i.e. - Specify a language/locale rather than letting dtlogin use the
       default value of "C", which may not be acceptable to the client.

------------------------------

6. DEVELOPMENT

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.15.2.8 How do I get cut-n-paste to work correctly with CDE?
Next Document: 6.1 General

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hpux.faq@gmail.com




Last Update March 27 2014 @ 02:11 PM