Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

comp.sys.hp.hpux FAQ
Section - 5.7.11 How can I enable the LAN interface on a 700?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Restaurant inspections ]


Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.7.10 How can multiple IP addresses be configured on one interface?
Next Document: 5.7.12 Where can I get STREAMS for HP-UX?
See reader questions & answers on this topic! - Help others by sharing your knowledge
This can be problem when the LAN isn't connected at boot time. To resolve
the problem, use the 'reset' command in 'landiag'.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA




Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.7.10 How can multiple IP addresses be configured on one interface?
Next Document: 5.7.12 Where can I get STREAMS for HP-UX?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hpux.faq@gmail.com





Last Update March 27 2014 @ 02:11 PM