faqs.org - Internet FAQ Archives

RFC 8113 - Locator/ID Separation Protocol (LISP): Shared Extensi


Or Display the document by number




Internet Engineering Task Force (IETF)                      M. Boucadair
Request for Comments: 8113                                  C. Jacquenet
Updates: 6830                                                     Orange
Category: Experimental                                        March 2017
ISSN: 2070-1721

                 Locator/ID Separation Protocol (LISP):
  Shared Extension Message & IANA Registry for Packet Type Allocations

Abstract

   This document specifies a Locator/ID Separation Protocol (LISP)
   shared message type for defining future extensions and conducting
   experiments without consuming a LISP packet type codepoint for each
   extension.  It also defines a registry for LISP Packet Type
   allocations, thus updating RFC 6830.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for examination, experimental implementation, and
   evaluation.

   This document defines an Experimental Protocol for the Internet
   community.  This document is a product of the Internet Engineering
   Task Force (IETF).  It represents the consensus of the IETF
   community.  It has received public review and has been approved for
   publication by the Internet Engineering Steering Group (IESG).  Not
   all documents approved by the IESG are a candidate for any level of
   Internet Standard; see Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc8113.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Requirements Language . . . . . . . . . . . . . . . . . . . .   3
   3.  LISP Shared Extension Message Type  . . . . . . . . . . . . .   3
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   3
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   4
     5.1.  LISP Packet Types . . . . . . . . . . . . . . . . . . . .   4
     5.2.  Sub-Types . . . . . . . . . . . . . . . . . . . . . . . .   4
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   5
     6.1.  Normative References  . . . . . . . . . . . . . . . . . .   5
     6.2.  Informative References  . . . . . . . . . . . . . . . . .   5
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .   6
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .   6

1.  Introduction

   The Locator/ID Separation Protocol (LISP) base specification,
   [RFC6830], defines a set of primitives that are identified with a
   packet type code.  Several extensions have been proposed to add more
   LISP functionalities.  For example, new message types are proposed in
   [LISP-DDT], [LISP-MN-EXT], [LISP-BULK], [NAT-LISP], or
   [LISP-SUBSCRIBE].  It is expected that additional LISP extensions
   will be proposed in the future.

   In order to ease the tracking of LISP message types, this document
   proposes to create a "LISP Packet Types" IANA registry (see
   Section 5).

   Because of the limited type space [RFC6830] and the need to conduct
   experiments to assess new LISP extensions, this document specifies a
   shared LISP extension message type and proposes a procedure for
   registering LISP shared extension sub-types (see Section 3).

   Concretely, one single LISP message type code is dedicated to future
   LISP extensions; sub-types are used to uniquely identify a given LISP
   extension making use of the shared LISP extension message type.
   These identifiers are selected by the author(s) of the corresponding
   LISP specification that introduces a new LISP extension message type.

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  LISP Shared Extension Message Type

   Figure 1 depicts the common format of the LISP shared extension
   message.  The type field MUST be set to 15 (see Section 5).

        0                   1                   2                   3
        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       |Type=15|        Sub-type       |   extension-specific          |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
       //                    extension-specific                       //
       //                                                             //
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

               Figure 1: LISP Shared Extension Message Type

   The "Sub-type" field conveys a unique identifier that MUST be
   registered with IANA (see Section 5.2).

   The exact structure of the 'extension-specific' portion of the
   message is specified in the corresponding specification document.

4.  Security Considerations

   This document does not introduce any additional security issues other
   than those discussed in [RFC6830].

5.  IANA Considerations

5.1.  LISP Packet Types

   IANA has created a new protocol registry for LISP Packet Types,
   numbered 0-15.  The registry is initially populated with the
   following values:

   Message                           Code    Reference
   ================================= ==== ===============
   Reserved                           0      [RFC6830]
   LISP Map-Request                   1      [RFC6830]
   LISP Map-Reply                     2      [RFC6830]
   LISP Map-Register                  3      [RFC6830]
   LISP Map-Notify                    4      [RFC6830]
   LISP Encapsulated Control Message  8      [RFC6830]
   LISP Shared Extension Message     15      [RFC8113]

   The values in the ranges 5-7 and 9-14 can be assigned via Standards
   Action [RFC5226].  Documents that request for a new LISP packet type
   may indicate a preferred value in the corresponding IANA sections.

5.2.  Sub-Types

   IANA has created the "LISP Shared Extension Message Type Sub-types"
   registry.  No initial values are assigned at the creation of the
   registry; (0-4095) are available for future assignments.

   The values in the range 0-1023 are assigned via Standards Action.
   This range is provisioned to anticipate, in particular, the
   exhaustion of the LISP Packet types.

   The values in the range 1024-4095 are assigned on a First Come, First
   Served (FCFS) basis.  The registration procedure should provide IANA
   with the desired codepoint and a point of contact; providing a short
   description (together with an acronym, if relevant) of the foreseen
   usage of the extension message is also encouraged.

6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              DOI 10.17487/RFC5226, May 2008,
              <http://www.rfc-editor.org/info/rfc5226>.

   [RFC6830]  Farinacci, D., Fuller, V., Meyer, D., and D. Lewis, "The
              Locator/ID Separation Protocol (LISP)", RFC 6830,
              DOI 10.17487/RFC6830, January 2013,
              <http://www.rfc-editor.org/info/rfc6830>.

6.2.  Informative References

   [LISP-BULK]
              Boucadair, M. and C. Jacquenet, "LISP Mapping Bulk
              Retrieval", Work in Progress,
              draft-boucadair-lisp-bulk-04, February 2017.

   [LISP-DDT] Fuller, V., Lewis, D., Ermagan, V., Jain, A., and A.
              Smirnov, "LISP Delegated Database Tree", Work in
              Progress, draft-ietf-lisp-ddt-09, January 2017.

   [LISP-MN-EXT]
              Wang, J., Meng, Y., and N. Zhao, "LISP Mobile Node
              extension", Work in Progress,
              draft-zhao-lisp-mn-extension-02, October 2011.

   [LISP-SUBSCRIBE]
              Boucadair, M. and C. Jacquenet, "LISP Subscription", Work
              in Progress, draft-boucadair-lisp-subscribe-04, February
              2017.

   [NAT-LISP] Ermagan, V., Farinacci, D., Lewis, D., Skriver, J., Maino,
              F., and C. White, "NAT traversal for LISP", Work in
              Progress, draft-ermagan-lisp-nat-traversal-11, August
              2016.

Acknowledgments

   This work is partly funded by ANR LISP-Lab project #ANR-13-INFR-
   009-X.

   Many thanks to Luigi Iannone, Dino Farinacci, and Alvaro Retana for
   the review.

   Thanks to Geoff Huston for the RtgDir directorate review.

Authors' Addresses

   Mohamed Boucadair
   Orange
   Rennes  35000
   France

   Email: mohamed.boucadair@orange.com

   Christian Jacquenet
   Orange
   Rennes  35000
   France

   Email: christian.jacquenet@orange.com

 

User Contributions:

Comment about this RFC, ask questions, or add new information about this topic: