Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI impressario Frequently Asked Questions (FAQ)
Section - -17- Is the Ikon 10088 parallel interface controller supported by Impressario?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Sex offenders ]


Top Document: SGI impressario Frequently Asked Questions (FAQ)
Previous Document: -16- Can I use the serial port for HP printers with Impressario?
Next Document: -18- Does Impressario support the HP JetDirect card?
See reader questions & answers on this topic! - Help others by sharing your knowledge
Date: 21 Mar 1994 00:00:01 EST

  No. The Ikon board is not supported.

  Note: The Ikon 10088 parallel interface controller is an optional VME board
  that provides a parallel port for older systems that do not have a built-in
  parallel port.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: SGI impressario Frequently Asked Questions (FAQ)
Previous Document: -16- Can I use the serial port for HP printers with Impressario?
Next Document: -18- Does Impressario support the HP JetDirect card?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)




Last Update March 27 2014 @ 02:12 PM