Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

comp.sys.hp.hpux FAQ
Section - 5.4.2 How can I change the video mode on my workstation?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Restaurant inspections ]


Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.4.1 How do I define a new terminal type?
Next Document: 5.5 Kernel Configuration
See reader questions & answers on this topic! - Help others by sharing your knowledge

Use the following command:

  # /opt/graphics/common/bin/setmon

setmon is a program that allows you to change video formats. When you
run setmon, it will print a table of available formats. The first
number on each line is an index.  Enter the index number for the entry
you want to use and setmon will change the card to match. The change
can be either temporary (until next boot) or permanent. Similar
functionality is available in sam. The -h option gives limited help.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:




Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.4.1 How do I define a new terminal type?
Next Document: 5.5 Kernel Configuration

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hpux.faq@gmail.com





Last Update March 27 2014 @ 02:11 PM