Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

comp.sys.hp.hpux FAQ
Section - 8.15 Why can't I get my machine into boot admin mode?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Neighborhoods ]


Top Document: comp.sys.hp.hpux FAQ
Previous Document: 8.14 Why can't I type an '@' character?
Next Document: 8.16 What happened to "less"?
See reader questions & answers on this topic! - Help others by sharing your knowledge
When i reboot my workstation I do not get the "..push and hold the ESCAPE
key to ..." - why?

The machine is configured in secure boot mode. To get into boot admin
mode you will need to remove all bootable media (i.e. disconnect disks,
LAN, etc.) and then power on - the boot will fail and you can then get
to boot admin and switch off secure boot mode.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: comp.sys.hp.hpux FAQ
Previous Document: 8.14 Why can't I type an '@' character?
Next Document: 8.16 What happened to "less"?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hpux.faq@gmail.com




Last Update March 27 2014 @ 02:11 PM