Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

comp.sys.hp.hpux FAQ
Section - 5.7.6 Why is ifconfig giving me errors when I try to configure my LAN?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Neighborhoods ]


Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.7.5 How do I disable IP Forwarding?
Next Document: 5.7.7 How do I change the hostname, IP address, DNS Server, etc?
See reader questions & answers on this topic! - Help others by sharing your knowledge

When I try to configure my lan device on my s700 I get the error
ifconfig: no such interface - why is that?

This is because the interface's hardware state is down. The s700 machines
need to be connected to a network before they can be configured with
ifconfig. Add the s700 machine to the network and then reset the interface
by running landiag (LAN->RESET). If no errors are reported, then you
should be able to ifconfig that interface.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:




Top Document: comp.sys.hp.hpux FAQ
Previous Document: 5.7.5 How do I disable IP Forwarding?
Next Document: 5.7.7 How do I change the hostname, IP address, DNS Server, etc?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hpux.faq@gmail.com





Last Update March 27 2014 @ 02:11 PM