Top Document: comp.sys.3b1 FAQ part1 Previous Document: 4.15. Why can't I send bitmapped images to the printer correctly? Next Document: 4.17. Any tips on building Cnews? See reader questions & answers on this topic! - Help others by sharing your knowledge Thanks to Jim Adams, included in the OSU Archives is an informational posting (posted to unix-pc.uucp and comp.sys.att) on how to set up your external modem under HDB uucp. The file is named HDB_Modem.Z. The file uses the "hayes" modem as the example, although information could probably be extracted for uses with other modems. If you want information on how to set up your Telebit Trailblazer modem, get the file tb-setup.sh.Z on OSU. This posting was too large to include in its entirety here, so a completely separate posting was made. He goes into how to set up the modem, proper cabling, proper Devices and Dialers entries, and a discussion on HFC (hardware flow control). Additionally, the "modemon" package by Boyd Ostroff provides a simple way to configure external modems. It consists of a small program executed via inittab which can reset your modem and execute any desired AT commands each time a getty is spawned on the serial port. This allows you to configure the modem differently for incoming and outgoing calls and is especially handy if your modem doesn't have nonvolatile parameter RAM. The package includes complete documentation and examples of how to set up an external modem. It was posted to comp.sources.3b1 and is available in the archives. User Contributions:Top Document: comp.sys.3b1 FAQ part1 Previous Document: 4.15. Why can't I send bitmapped images to the printer correctly? Next Document: 4.17. Any tips on building Cnews? Part1 - Part2 - Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: jbunch@nyx.nyx.net (John B. Bunch)
Last Update March 27 2014 @ 02:11 PM
|
Comment about this article, ask questions, or add new information about this topic: