RFC 5223 - Discovering Location-to-Service Translation (LoST) Se
[ RFC Index | Usenet FAQs | Web FAQs | Documents | Cities | SEC Filings | Business Photos and Profiles ]
Network Working Group H. Schulzrinne Request for Comments: 5223 Columbia University Category: Standards Track J. Polk Cisco H. Tschofenig Nokia Siemens Networks August 2008 Discovering Location-to-Service Translation (LoST) Servers Using the Dynamic Host Configuration Protocol (DHCP) Status of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Abstract The Location-to-Service Translation (LoST) Protocol describes an XML- based protocol for mapping service identifiers and geospatial or civic location information to service contact Uniform Resource Locators (URLs). LoST servers can be located anywhere, but a placement closer to the end host, e.g., in the access network, is desirable. In disaster situations with intermittent network connectivity, such a LoST server placement provides benefits regarding the resiliency of emergency service communication. This document describes how a LoST client can discover a LoST server using the Dynamic Host Configuration Protocol (DHCP). Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Domain Name Encoding . . . . . . . . . . . . . . . . . . . . . 3 4. LoST Server DHCPv4 Option . . . . . . . . . . . . . . . . . . . 3 5. LoST Server DHCPv6 Option . . . . . . . . . . . . . . . . . . . 4 6. Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5 7.1. DHCPv4 Option . . . . . . . . . . . . . . . . . . . . . . . 5 7.2. DHCPv6 Option . . . . . . . . . . . . . . . . . . . . . . . 5 8. Security Considerations . . . . . . . . . . . . . . . . . . . . 5 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 5 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 6 10.1. Normative References . . . . . . . . . . . . . . . . . . . 6 10.2. Informative References . . . . . . . . . . . . . . . . . . 6 1. Introduction The Location-to-Service Translation (LoST) Protocol [RFC5222] describes an XML-based protocol for mapping service identifiers and geospatial or civic location information to service contact Uniform Resource Locators (URLs). In order to interact with a LoST server, the LoST client needs to discover the server's IP address. Several mechanisms can be used to learn this address, including manual configuration. In environments where the access network itself either deploys a LoST server or knows a third party that operates a LoST server, DHCP can provide the end host with a domain name. This domain name is then used as input to the DNS-based resolution mechanism described in LoST [RFC5222] that reuses the URI-enabled NAPTR specification (see [RFC4848]). This document specifies a DHCPv4 and a DHCPv6 option that allows LoST clients to discover local LoST servers. Section 2 provides terminology. Section 3 shows the encoding of the domain name. Section 4 describes the DHCPv4 option while Section 5 describes the DHCPv6 option, with the same functionality. IANA and Security Considerations complete the document in Sections 7 and 8. 2. Terminology In this document, the key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" are to be interpreted as described in RFC 2119 [RFC2119]. Within this document, we use terminology from [RFC5012] and [RFC5222]. 3. Domain Name Encoding This section describes the encoding of the domain name used in the DHCPv4 option shown in Section 4 and also used in the DHCPv6 option shown in Section 5. The domain name is encoded according to Section 3.1 of RFC 1035 [RFC1035] whereby each label is represented as a one-octet length field followed by that number of octets. Since every domain name ends with the null label of the root, a domain name is terminated by a length byte of zero. The high-order two bits of every length octet MUST be zero, and the remaining six bits of the length field limit the label to 63 octets or less. To simplify implementations, the total length of a domain name (i.e., label octets and label length octets) is restricted to 255 octets or less. 4. LoST Server DHCPv4 Option The LoST server DHCPv4 option carries a DNS (RFC 1035 [RFC1035]) fully-qualified domain name (FQDN) to be used by the LoST client to locate a LoST server. The DHCP option for this encoding has the following format: Code Len LoST Server Domain Name +-----+-----+-----+-----+-----+-----+-----+---- | 137 | n | s1 | s2 | s3 | s4 | s5 | ... +-----+-----+-----+-----+-----+-----+-----+---- Figure 1: LoST FQDN DHCPv4 Option The values s1, s2, s3, etc. represent the domain name labels in the domain name encoding. Note that the length field in the DHCPv4 option represents the length of the entire domain name encoding, whereas the length fields in the domain name encoding (see Section 3) is the length of a single domain name label. Code: OPTION_V4_LOST (137) Len: Length of the 'LoST Server Domain Name' field in octets; variable. LoST Server Domain Name: The domain name of the LoST server for the client to use. A DHCPv4 client MAY request a LoST server domain name in a Parameter Request List option, as described in [RFC2131]. The encoding of the domain name is described in Section 3. This option contains a single domain name and, as such, MUST contain precisely one root label. 5. LoST Server DHCPv6 Option This section defines a DHCPv6 option to carry a domain name. The DHCPv6 option has the format shown in Figure 2. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | OPTION_V6_LOST | option-length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | LoST Server Domain Name | | ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ option-code: OPTION_V6_LOST (51) option-length: Length of the 'LoST Server Domain Name' field in octets; variable. LoST Server Domain Name: The domain name of the LoST server for the client to use. Figure 2: DHCPv6 Option for LoST Server Domain Name List A DHCPv6 client MAY request a LoST server domain name in an Options Request Option (ORO), as described in [RFC3315]. The encoding of the domain name is described in Section 3. This option contains a single domain name and, as such, MUST contain precisely one root label. 6. Example This section shows an example of a DHCPv4 option where the DHCP server wants to offer the "example.com" domain name to the client as input to the U-NAPTR LoST discovery procedure. This domain name would be encoded as follows: +----+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ |137 |13 | 7 | e | x | a | m | p | l | e | 3 | c | o | m | 0 | +----+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ Figure 3: Example for a LoST FQDN DHCPv4 Option 7. IANA Considerations 7.1. DHCPv4 Option The following DHCPv4 option code for the Location-to-Service Translation (LoST) Protocol server option has been assigned by IANA: Option Name Value Described in ----------------------------------------------- OPTION_V4_LOST 137 Section 4 7.2. DHCPv6 Option IANA has assigned the following DHCPv6 option code for the Location- to-Service Translation (LoST) Protocol option: Option Name Value Described in ------------------------------------------------ OPTION_V6_LOST 51 Section 5 8. Security Considerations If an adversary manages to modify the response from a DHCP server or insert its own response, a LoST client could be led to contact a rogue LoST server under the control of the adversary or be given an invalid address. These threats are documented in [RFC5069]. The security considerations in [RFC2131], [RFC2132], and [RFC3315] are applicable to this document. [RFC5222] enumerates the LoST security mechanisms. 9. Acknowledgements Andrew Newton reviewed the document and helped simplify the mechanism. Other helpful input was provided by Jari Arkko, Leslie Daigle, Vijay K. Gurbani (Gen-ART Review), David W. Hankins, Russ Housley, Tim Polk, Mark Stapp, and Christian Vogt. 10. References 10.1. Normative References [RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119, BCP 14, March 1997. [RFC2131] Droms, R., "Dynamic Host Configuration Protocol", RFC 2131, March 1997. [RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor Extensions", RFC 2132, March 1997. [RFC3315] Droms, R., Bound, J., Volz, B., Lemon, T., Perkins, C., and M. Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3315, July 2003. 10.2. Informative References [RFC4848] Daigle, L., "Domain-Based Application Service Location Using URIs and the Dynamic Delegation Discovery Service (DDDS)", RFC 4848, April 2007. [RFC5012] Schulzrinne, H. and R. Marshall, "Requirements for Emergency Context Resolution with Internet Technologies", RFC 5012, January 2008. [RFC5069] Taylor, T., Tschofenig, H., Schulzrinne, H., and M. Shanmugam, "Security Threats and Requirements for Emergency Call Marking and Mapping", RFC 5069, January 2008. [RFC5222] Hardie, T., Newton, A., Schulzrinne, H., and H. Tschofenig, "LoST: A Location-to-Service Translation Protocol", RFC 5222, August 2008. Authors' Addresses Henning Schulzrinne Columbia University Department of Computer Science 450 Computer Science Building New York, NY 10027 US EMail: firstname.lastname@example.org URI: http://www.cs.columbia.edu James Polk Cisco 2200 East President George Bush Turnpike Richardson, TX 75082 US EMail: email@example.com Hannes Tschofenig Nokia Siemens Networks Linnoitustie 6 Espoo 02600 Finland Phone: +358 (50) 4871445 EMail: Hannes.Tschofenig@nsn.com URI: http://www.tschofenig.priv.at Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at firstname.lastname@example.org.