RFC 1186  MD4 Message Digest Algorithm
Network Working Group R. Rivest Request for Comments: 1186 MIT Laboratory for Computer Science October 1990 The MD4 Message Digest Algorithm Status of this Memo This RFC is the specification of the MD4 Digest Algorithm. If you are going to implement MD4, it is suggested you do it this way. This memo is for informational use and does not constitute a standard. Distribution of this memo is unlimited. Table of Contents 1. Abstract .................................................... 1 2. Terminology and Notation .................................... 2 3. MD4 Algorithm Description ................................... 2 4. Extensions .................................................. 6 5. Summary ..................................................... 7 6. Acknowledgements ............................................ 7 APPENDIX  Reference Implementation ............................. 7 Security Considerations.......................................... 18 Author's Address................................................. 18 1. Abstract This note describes the MD4 message digest algorithm. The algorithm takes as input an input message of arbitrary length and produces as output a 128bit "fingerprint" or "message digest" of the input. It is conjectured that it is computationally infeasible to produce two messages having the same message digest, or to produce any message having a given prespecified target message digest. The MD4 algorithm is thus ideal for digital signature applications, where a large file must be "compressed" in a secure manner before being signed with the RSA publickey cryptosystem. The MD4 algorithm is designed to be quite fast on 32bit machines. On a SUN Sparc station, MD4 runs at 1,450,000 bytes/second. On a DEC MicroVax II, MD4 runs at approximately 70,000 bytes/second. On a 20MHz 80286, MD4 runs at approximately 32,000 bytes/second. In addition, the MD4 algorithm does not require any large substitution tables; the algorithm can be coded quite compactly. The MD4 algorithm is being placed in the public domain for review and possible adoption as a standard. (Note: The document supersedes an earlier draft. The algorithm described here is a slight modification of the one described in the draft.) 2. Terminology and Notation In this note a "word" is a 32bit quantity and a byte is an 8bit quantity. A sequence of bits can be interpreted in a natural manner as a sequence of bytes, where each consecutive group of 8 bits is interpreted as a byte with the highorder (most significant) bit of each byte listed first. Similarly, a sequence of bytes can be interpreted as a sequence of 32bit words, where each consecutive group of 4 bytes is interpreted as a word with the loworder (least significant) byte given first. Let x_i denote "x sub i". If the subscript is an expression, we surround it in braces, as in x_{i+1}. Similarly, we use ^ for superscripts (exponentiation), so that x^i denotes x to the ith power. Let the symbol "+" denote addition of words (i.e., modulo 2^32 addition). Let X <<< s denote the 32bit value obtained by circularly shifting (rotating) X left by s bit positions. Let not(X) denote the bitwise complement of X, and let X v Y denote the bitwise OR of X and Y. Let X xor Y denote the bitwise XOR of X and Y, and let XY denote the bitwise AND of X and Y. 3. MD4 Algorithm Description We begin by supposing that we have a bbit message as input, and that we wish to find its message digest. Here b is an arbitrary nonnegative integer; b may be zero, it need not be a multiple of 8, and it may be arbitrarily large. We imagine the bits of the message written down as follows: m_0 m_1 ... m_{b1} . The following five steps are performed to compute the message digest of the message. Step 1. Append padding bits The message is "padded" (extended) so that its length (in bits) is congruent to 448, modulo 512. That is, the message is extended so that it is just 64 bits shy of being a multiple of 512 bits long. Padding is always performed, even if the length of the message is already congruent to 448, modulo 512 (in which case 512 bits of padding are added). Padding is performed as follows: a single "1" bit is appended to the message, and then enough zero bits are appended so that the length in bits of the padded message becomes congruent to 448, modulo 512. Step 2. Append length A 64bit representation of b (the length of the message before the padding bits were added) is appended to the result of the previous step. In the unlikely event that b is greater than 2^64, then only the loworder 64 bits of b are used. (These bits are appended as two 32bit words and appended loworder word first in accordance with the previous conventions.) At this point the resulting message (after padding with bits and with b) has a length that is an exact multiple of 512 bits. Equivalently, this message has a length that is an exact multiple of 16 (32bit) words. Let M[0 ... N1] denote the words of the resulting message, where N is a multiple of 16. Step 3. Initialize MD buffer A 4word buffer (A,B,C,D) is used to compute the message digest. Here each of A,B,C,D are 32bit registers. These registers are initialized to the following values in hexadecimal, loworder bytes first): word A: 01 23 45 67 word B: 89 ab cd ef word C: fe dc ba 98 word D: 76 54 32 10 Step 4. Process message in 16word blocks We first define three auxiliary functions that each take as input three 32bit words and produce as output one 32bit word. f(X,Y,Z) = XY v not(X)Z g(X,Y,Z) = XY v XZ v YZ h(X,Y,Z) = X xor Y xor Z In each bit position f acts as a conditional: if x then y else z. (The function f could have been defined using + instead of v since XY and not(X)Z will never have 1's in the same bit position.) In each bit position g acts as a majority function: if at least two of x, y, z are on, then g has a one in that bit position, else g has a zero. It is interesting to note that if the bits of X, Y, and Z are independent and unbiased, the each bit of f(X,Y,Z) will be independent and unbiased, and similarly each bit of g(X,Y,Z) will be independent and unbiased. The function h is the bitwise "xor" or "parity" function; it has properties similar to those of f and g. Do the following: For i = 0 to N/161 do /* process each 16word block */ For j = 0 to 15 do: /* copy block i into X */ Set X[j] to M[i*16+j]. end /* of loop on j */ Save A as AA, B as BB, C as CC, and D as DD. [Round 1] Let [A B C D i s] denote the operation A = (A + f(B,C,D) + X[i]) <<< s . Do the following 16 operations: [A B C D 0 3] [D A B C 1 7] [C D A B 2 11] [B C D A 3 19] [A B C D 4 3] [D A B C 5 7] [C D A B 6 11] [B C D A 7 19] [A B C D 8 3] [D A B C 9 7] [C D A B 10 11] [B C D A 11 19] [A B C D 12 3] [D A B C 13 7] [C D A B 14 11] [B C D A 15 19] [Round 2] Let [A B C D i s] denote the operation A = (A + g(B,C,D) + X[i] + 5A827999) <<< s . (The value 5A..99 is a hexadecimal 32bit constant, written with the highorder digit first. This constant represents the square root of 2. The octal value of this constant is 013240474631. See Knuth, The Art of Programming, Volume 2 (Seminumerical Algorithms), Second Edition (1981), AddisonWesley. Table 2, page 660.) Do the following 16 operations: [A B C D 0 3] [D A B C 4 5] [C D A B 8 9] [B C D A 12 13] [A B C D 1 3] [D A B C 5 5] [C D A B 9 9] [B C D A 13 13] [A B C D 2 3] [D A B C 6 5] [C D A B 10 9] [B C D A 14 13] [A B C D 3 3] [D A B C 7 5] [C D A B 11 9] [B C D A 15 13] [Round 3] Let [A B C D i s] denote the operation A = (A + h(B,C,D) + X[i] + 6ED9EBA1) <<< s . (The value 6E..A1 is a hexadecimal 32bit constant, written with the highorder digit first. This constant represents the square root of 3. The octal value of this constant is 015666365641. See Knuth, The Art of Programming, Volume 2 (Seminumerical Algorithms), Second Edition (1981), AddisonWesley. Table 2, page 660.) Do the following 16 operations: [A B C D 0 3] [D A B C 8 9] [C D A B 4 11] [B C D A 12 15] [A B C D 2 3] [D A B C 10 9] [C D A B 6 11] [B C D A 14 15] [A B C D 1 3] [D A B C 9 9] [C D A B 5 11] [B C D A 13 15] [A B C D 3 3] [D A B C 11 9] [C D A B 7 11] [B C D A 15 15] Then perform the following additions: A = A + AA B = B + BB C = C + CC D = D + DD (That is, each of the four registers is incremented by the value it had before this block was started.) end /* of loop on i */ Step 5. Output The message digest produced as output is A,B,C,D. That is, we begin with the loworder byte of A, and end with the highorder byte of D. This completes the description of MD4. A reference implementation in C is given in the Appendix. 4. Extensions If more than 128 bits of output are required, then the following procedure is recommended to obtain a 256bit output. (There is no provision made for obtaining more than 256 bits.) Two copies of MD4 are run in parallel over the input. The first copy is standard as described above. The second copy is modified as follows. The initial state of the second copy is: word A: 00 11 22 33 word B: 44 55 66 77 word C: 88 99 aa bb word D: cc dd ee ff The magic constants in rounds 2 and 3 for the second copy of MD4 are changed from sqrt(2) and sqrt(3) to cuberoot(2) and cuberoot(3): Octal Hex Round 2 constant 012050505746 50a28be6 Round 3 constant 013423350444 5c4dd124 Finally, after every 16word block is processed (including the last block), the values of the A registers in the two copies are exchanged. The final message digest is obtaining by appending the result of the second copy of MD4 to the end of the result of the first copy of MD4. 5. Summary The MD4 message digest algorithm is simple to implement, and provides a "fingerprint" or message digest of a message of arbitrary length. It is conjectured that the difficulty of coming up with two messages having the same message digest is on the order of 2^64 operations, and that the difficulty of coming up with any message having a given message digest is on the order of 2^128 operations. The MD4 algorithm has been carefully scrutinized for weaknesses. It is, however, a relatively new algorithm and further security analysis is of course justified, as is the case with any new proposal of this sort. The level of security provided by MD4 should be sufficient for implementing very high security hybrid digital signature schemes based on MD4 and the RSA publickey cryptosystem. 6. Acknowledgements I'd like to thank Don Coppersmith, Burt Kaliski, Ralph Merkle, and Noam Nisan for numerous helpful comments and suggestions. APPENDIX  Reference Implementation This appendix contains the following files: md4.h  header file for using MD4 implementation md4.c  the source code for MD4 routines md4driver.c  a sample "user" routine session  sample results of running md4driver /* ** ******************************************************************** ** md4.h  Header file for implementation of ** ** MD4 Message Digest Algorithm ** ** Updated: 2/13/90 by Ronald L. Rivest ** ** (C) 1990 RSA Data Security, Inc. ** ** ******************************************************************** */ /* MDstruct is the data structure for a message digest computation. */ typedef struct { unsigned int buffer[4]; /* Holds 4word result of MD computation */ unsigned char count[8]; /* Number of bits processed so far */ unsigned int done; /* Nonzero means MD computation finished */ } MDstruct, *MDptr; /* MDbegin(MD) ** Input: MD  an MDptr ** Initialize the MDstruct prepatory to doing a message digest ** computation. */ extern void MDbegin(); /* MDupdate(MD,X,count) ** Input: MD  an MDptr ** X  a pointer to an array of unsigned characters. ** count  the number of bits of X to use (an unsigned int). ** Updates MD using the first "count" bits of X. ** The array pointed to by X is not modified. ** If count is not a multiple of 8, MDupdate uses high bits of ** last byte. ** This is the basic input routine for a user. ** The routine terminates the MD computation when count < 512, so ** every MD computation should end with one call to MDupdate with a ** count less than 512. Zero is OK for a count. */ extern void MDupdate(); /* MDprint(MD) ** Input: MD  an MDptr ** Prints message digest buffer MD as 32 hexadecimal digits. ** Order is from loworder byte of buffer[0] to highorder byte ** of buffer[3]. ** Each byte is printed with highorder hexadecimal digit first. */ extern void MDprint(); /* ** End of md4.h ****************************(cut)***********************************/ /* ** ******************************************************************** ** md4.c  Implementation of MD4 Message Digest Algorithm ** ** Updated: 2/16/90 by Ronald L. Rivest ** ** (C) 1990 RSA Data Security, Inc. ** ** ******************************************************************** */ /* ** To use MD4: **  Include md4.h in your program **  Declare an MDstruct MD to hold the state of the digest ** computation. **  Initialize MD using MDbegin(&MD) **  For each full block (64 bytes) X you wish to process, call ** MDupdate(&MD,X,512) ** (512 is the number of bits in a full block.) **  For the last block (less than 64 bytes) you wish to process, ** MDupdate(&MD,X,n) ** where n is the number of bits in the partial block. A partial ** block terminates the computation, so every MD computation ** should terminate by processing a partial block, even if it ** has n = 0. **  The message digest is available in MD.buffer[0] ... ** MD.buffer[3]. (Leastsignificant byte of each word ** should be output first.) **  You can print out the digest using MDprint(&MD) */ /* Implementation notes: ** This implementation assumes that ints are 32bit quantities. ** If the machine stores the leastsignificant byte of an int in the ** leastaddressed byte (e.g., VAX and 8086), then LOWBYTEFIRST ** should be set to TRUE. Otherwise (e.g., SUNS), LOWBYTEFIRST ** should be set to FALSE. Note that on machines with LOWBYTEFIRST ** FALSE the routine MDupdate modifies has a sideeffect on its input ** array (the order of bytes in each word are reversed). If this is ** undesired a call to MDreverse(X) can reverse the bytes of X back ** into order after each call to MDupdate. */ #define TRUE 1 #define FALSE 0 #define LOWBYTEFIRST FALSE /* Compiletime includes */ #include <stdio.h> #include "md4.h" /* Compiletime declarations of MD4 "magic constants". */ #define I0 0x67452301 /* Initial values for MD buffer */ #define I1 0xefcdab89 #define I2 0x98badcfe #define I3 0x10325476 #define C2 013240474631 /* round 2 constant = sqrt(2) in octal */ #define C3 015666365641 /* round 3 constant = sqrt(3) in octal */ /* C2 and C3 are from Knuth, The Art of Programming, Volume 2 ** (Seminumerical Algorithms), Second Edition (1981), AddisonWesley. ** Table 2, page 660. */ #define fs1 3 /* round 1 shift amounts */ #define fs2 7 #define fs3 11 #define fs4 19 #define gs1 3 /* round 2 shift amounts */ #define gs2 5 #define gs3 9 #define gs4 13 #define hs1 3 /* round 3 shift amounts */ #define hs2 9 #define hs3 11 #define hs4 15 /* Compiletime macro declarations for MD4. ** Note: The "rot" operator uses the variable "tmp". ** It assumes tmp is declared as unsigned int, so that the >> ** operator will shift in zeros rather than extending the sign bit. */ #define f(X,Y,Z) ((X&Y)  ((~X)&Z)) #define g(X,Y,Z) ((X&Y)  (X&Z)  (Y&Z)) #define h(X,Y,Z) (X^Y^Z) #define rot(X,S) (tmp=X,(tmp<<S)  (tmp>>(32S))) #define ff(A,B,C,D,i,s) A = rot((A + f(B,C,D) + X[i]),s) #define gg(A,B,C,D,i,s) A = rot((A + g(B,C,D) + X[i] + C2),s) #define hh(A,B,C,D,i,s) A = rot((A + h(B,C,D) + X[i] + C3),s) /* MDprint(MDp) ** Print message digest buffer MDp as 32 hexadecimal digits. ** Order is from loworder byte of buffer[0] to highorder byte of ** buffer[3]. ** Each byte is printed with highorder hexadecimal digit first. ** This is a usercallable routine. */ void MDprint(MDp) MDptr MDp; { int i,j; for (i=0;i<4;i++) for (j=0;j<32;j=j+8) printf("%02x",(MDp>buffer[i]>>j) & 0xFF); } /* MDbegin(MDp) ** Initialize message digest buffer MDp. ** This is a usercallable routine. */ void MDbegin(MDp) MDptr MDp; { int i; MDp>buffer[0] = I0; MDp>buffer[1] = I1; MDp>buffer[2] = I2; MDp>buffer[3] = I3; for (i=0;i<8;i++) MDp>count[i] = 0; MDp>done = 0; } /* MDreverse(X) ** Reverse the byteordering of every int in X. ** Assumes X is an array of 16 ints. ** The macro revx reverses the byteordering of the next word of X. */ #define revx { t = (*X << 16)  (*X >> 16); \ *X++ = ((t & 0xFF00FF00) >> 8)  ((t & 0x00FF00FF) << 8); } MDreverse(X) unsigned int *X; { register unsigned int t; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; revx; } /* MDblock(MDp,X) ** Update message digest buffer MDp>buffer using 16word data block X. ** Assumes all 16 words of X are full of data. ** Does not update MDp>count. ** This routine is not usercallable. */ static void MDblock(MDp,X) MDptr MDp; unsigned int *X; { register unsigned int tmp, A, B, C, D; #if LOWBYTEFIRST == FALSE MDreverse(X); #endif A = MDp>buffer[0]; B = MDp>buffer[1]; C = MDp>buffer[2]; D = MDp>buffer[3]; /* Update the message digest buffer */ ff(A , B , C , D , 0 , fs1); /* Round 1 */ ff(D , A , B , C , 1 , fs2); ff(C , D , A , B , 2 , fs3); ff(B , C , D , A , 3 , fs4); ff(A , B , C , D , 4 , fs1); ff(D , A , B , C , 5 , fs2); ff(C , D , A , B , 6 , fs3); ff(B , C , D , A , 7 , fs4); ff(A , B , C , D , 8 , fs1); ff(D , A , B , C , 9 , fs2); ff(C , D , A , B , 10 , fs3); ff(B , C , D , A , 11 , fs4); ff(A , B , C , D , 12 , fs1); ff(D , A , B , C , 13 , fs2); ff(C , D , A , B , 14 , fs3); ff(B , C , D , A , 15 , fs4); gg(A , B , C , D , 0 , gs1); /* Round 2 */ gg(D , A , B , C , 4 , gs2); gg(C , D , A , B , 8 , gs3); gg(B , C , D , A , 12 , gs4); gg(A , B , C , D , 1 , gs1); gg(D , A , B , C , 5 , gs2); gg(C , D , A , B , 9 , gs3); gg(B , C , D , A , 13 , gs4); gg(A , B , C , D , 2 , gs1); gg(D , A , B , C , 6 , gs2); gg(C , D , A , B , 10 , gs3); gg(B , C , D , A , 14 , gs4); gg(A , B , C , D , 3 , gs1); gg(D , A , B , C , 7 , gs2); gg(C , D , A , B , 11 , gs3); gg(B , C , D , A , 15 , gs4); hh(A , B , C , D , 0 , hs1); /* Round 3 */ hh(D , A , B , C , 8 , hs2); hh(C , D , A , B , 4 , hs3); hh(B , C , D , A , 12 , hs4); hh(A , B , C , D , 2 , hs1); hh(D , A , B , C , 10 , hs2); hh(C , D , A , B , 6 , hs3); hh(B , C , D , A , 14 , hs4); hh(A , B , C , D , 1 , hs1); hh(D , A , B , C , 9 , hs2); hh(C , D , A , B , 5 , hs3); hh(B , C , D , A , 13 , hs4); hh(A , B , C , D , 3 , hs1); hh(D , A , B , C , 11 , hs2); hh(C , D , A , B , 7 , hs3); hh(B , C , D , A , 15 , hs4); MDp>buffer[0] += A; MDp>buffer[1] += B; MDp>buffer[2] += C; MDp>buffer[3] += D; } /* MDupdate(MDp,X,count) ** Input: MDp  an MDptr ** X  a pointer to an array of unsigned characters. ** count  the number of bits of X to use. ** (if not a multiple of 8, uses high bits of last byte.) ** Update MDp using the number of bits of X given by count. ** This is the basic input routine for an MD4 user. ** The routine completes the MD computation when count < 512, so ** every MD computation should end with one call to MDupdate with a ** count less than 512. A call with count 0 will be ignored if the ** MD has already been terminated (done != 0), so an extra call with ** count 0 can be given as a "courtesy close" to force termination ** if desired. */ void MDupdate(MDp,X,count) MDptr MDp; unsigned char *X; unsigned int count; { unsigned int i, tmp, bit, byte, mask; unsigned char XX[64]; unsigned char *p; /* return with no error if this is a courtesy close with count ** zero and MDp>done is true. */ if (count == 0 && MDp>done) return; /* check to see if MD is already done and report error */ if (MDp>done) { printf("\nError: MDupdate MD already done."); return; } /* Add count to MDp>count */ tmp = count; p = MDp>count; while (tmp) { tmp += *p; *p++ = tmp; tmp = tmp >> 8; } /* Process data */ if (count == 512) { /* Full block of data to handle */ MDblock(MDp,(unsigned int *)X); } else if (count > 512) /* Check for count too large */ { printf("\nError: MDupdate called with illegal count value %d." ,count); return; } else /* partial block  must be last block so finish up */ { /* Find out how many bytes and residual bits there are */ byte = count >> 3; bit = count & 7; /* Copy X into XX since we need to modify it */ for (i=0;i<=byte;i++) XX[i] = X[i]; for (i=byte+1;i<64;i++) XX[i] = 0; /* Add padding '1' bit and loworder zeros in last byte */ mask = 1 << (7  bit); XX[byte] = (XX[byte]  mask) & ~( mask  1); /* If room for bit count, finish up with this block */ if (byte <= 55) { for (i=0;i<8;i++) XX[56+i] = MDp>count[i]; MDblock(MDp,(unsigned int *)XX); } else /* need to do two blocks to finish up */ { MDblock(MDp,(unsigned int *)XX); for (i=0;i<56;i++) XX[i] = 0; for (i=0;i<8;i++) XX[56+i] = MDp>count[i]; MDblock(MDp,(unsigned int *)XX); } /* Set flag saying we're done with MD computation */ MDp>done = 1; } } /* ** End of md4.c ****************************(cut)***********************************/ /* ** ******************************************************************** ** md4driver.c  sample routines to test ** ** MD4 message digest algorithm. ** ** Updated: 2/16/90 by Ronald L. Rivest ** ** (C) 1990 RSA Data Security, Inc. ** ** ******************************************************************** */ #include <stdio.h> #include "md4.h" /* MDtimetrial() ** A time trial routine, to measure the speed of MD4. ** Measures speed for 1M blocks = 64M bytes. */ MDtimetrial() { unsigned int X[16]; MDstruct MD; int i; double t; for (i=0;i<16;i++) X[i] = 0x01234567 + i; printf ("MD4 time trial. Processing 1 million 64character blocks...\n"); clock(); MDbegin(&MD); for (i=0;i<1000000;i++) MDupdate(&MD,X,512); MDupdate(&MD,X,0); t = (double) clock(); /* in microseconds */ MDprint(&MD); printf(" is digest of 64M byte test input.\n"); printf("Seconds to process test input: %g\n,t/1e6); printf("Characters processed per second: %ld.\n,(int)(64e12/t)); } /* MDstring(s) ** Computes the message digest for string s. ** Prints out message digest, a space, the string (in quotes) and a ** carriage return. */ MDstring(s) unsigned char *s; { unsigned int i, len = strlen(s); MDstruct MD; MDbegin(&MD); for (i=0;i+64<=len;i=i+64) MDupdate(&MD,s+i,512); MDupdate(&MD,s+i,(leni)*8); MDprint(&MD); printf(" \"%s\"\n",s); } /* MDfile(filename) ** Computes the message digest for a specified file. ** Prints out message digest, a space, the file name, and a ** carriage return. */ MDfile(filename) char *filename; { FILE *f = fopen(filename,"rb"); unsigned char X[64]; MDstruct MD; int b; if (f == NULL) { printf("%s can't be opened.\n",filename); return; } MDbegin(&MD); while ((b=fread(X,1,64,f))!=0) MDupdate(&MD,X,b*8); MDupdate(&MD,X,0); MDprint(&MD); printf(" %s\n",filename); fclose(f); } /* MDfilter() ** Writes the message digest of the data from stdin onto stdout, ** followed by a carriage return. */ MDfilter() { unsigned char X[64]; MDstruct MD; int b; MDbegin(&MD); while ((b=fread(X,1,64,stdin))!=0) MDupdate(&MD,X,b*8); MDupdate(&MD,X,0); MDprint(&MD); printf("\n"); } /* MDtestsuite() ** Run a standard suite of test data. */ MDtestsuite() { printf("MD4 test suite results:\n"); MDstring(""); MDstring("a"); MDstring("abc"); MDstring("message digest"); MDstring("abcdefghijklmnopqrstuvwxyz"); MDstring ("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"); MDfile("foo"); /* Contents of file foo are "abc" */ } main(argc,argv) int argc; char *argv[]; { int i; /* For each command line argument in turn: ** filename  prints message digest and name of file ** sstring  prints message digest and contents of string ** t  prints time trial statistics for 64M bytes ** x  execute a standard suite of test data ** (no args)  writes messages digest of stdin onto stdout */ if (argc==1) MDfilter(); else for (i=1;i<argc;i++) if (argv[i][0]=='' && argv[i][1]=='s') MDstring(argv[i]+2); else if (strcmp(argv[i],"t")==0) MDtimetrial(); else if (strcmp(argv[i],"x")==0) MDtestsuite(); else MDfile(argv[i]); } /* ** end of md4driver.c ****************************(cut)***********************************/   Sample session. Compiling and using MD4 on SUN Sparcstation   >ls total 66 rwrwr 1 rivest 3 Feb 14 17:40 abcfile rwxrwxrx 1 rivest 24576 Feb 17 12:28 md4 rwrwr 1 rivest 9347 Feb 17 00:37 md4.c rwrwr 1 rivest 25150 Feb 17 12:25 md4.doc rwrwr 1 rivest 1844 Feb 16 21:21 md4.h rwrwr 1 rivest 3497 Feb 17 12:27 md4driver.c > >cc o md4 O4 md4.c md4driver.c md4.c: md4driver.c: Linking: > >md4 x MD4 test suite results: 31d6cfe0d16ae931b73c59d7e0c089c0 "" bde52cb31de33e46245e05fbdbd6fb24 "a" a448017aaf21d8525fc10ae87aa6729d "abc" d9130a8164549fe818874806e1c7014b "message digest" d79e1c308aa5bbcdeea8ed63df412da9 "abcdefghijklmnopqrstuvwxyz" 043f8582f241db351ce627e153e7f0e4 "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789" a448017aaf21d8525fc10ae87aa6729d abcfile > >md4 sabc shi a448017aaf21d8525fc10ae87aa6729d "abc" cfaee2512bd25eb033236f0cd054e308 "hi" > >md4 * a448017aaf21d8525fc10ae87aa6729d abcfile d316f994da0e951cf9502928a1f73300 md4 379adb39eada0dfdbbdfdcd0d9def8c4 md4.c 9a3f73327c65954198b1f45a3aa12665 md4.doc 37fe165ac177b461ff78b86d10e4ff33 md4.h 7dcba2e2dc4d8f1408d08beb17dabb2a md4.o 08790161bfddc6f5788b4353875cb1c3 md4driver.c 1f84a7f690b0545d2d0480d5d3c26eea md4driver.o > >cat abcfile  md4 a448017aaf21d8525fc10ae87aa6729d > >md4 t MD4 time trial. Processing 1 million 64character blocks... 6325bf77e5891c7c0d8104b64cc6e9ef is digest of 64M byte test input. Seconds to process test input: 44.0982 Characters processed per second: 1451305. > >  end of sample session  Note: A version of this document including the C source code is available for FTP from THEORY.LSC.MIT.EDU in the file "md4.doc". Security Considerations The level of security discussed in this memo by MD4 is considered to be sufficient for implementing very high security hybrid digital signature schemes based on MD4 and the RSA publickey cryptosystem. Author's Address Ronald L. Rivest Massachusetts Institute of Technology Laboratory for Computer Science NE43324 545 Technology Square Cambridge, MA 021391986 Phone: (617) 2535880 EMail: rivest@theory.lcs.mit.edu User Contributions:Comment about this RFC, ask questions, or add new information about this topic:
