Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI performer Frequently Asked Questions (FAQ)
Section - -37- Frame control on low- and mid-range machines

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Forum ]


Top Document: SGI performer Frequently Asked Questions (FAQ)
Previous Document: -36- Gangdraw and cursor loading
Next Document: -38- Timing on pre-1992 platforms
See reader questions & answers on this topic! - Help others by sharing your knowledge

  Frame control on low- and mid-range machines: Currently, the video
  clock (pfInitVClock, pfGetVClock, pfVClockSync) is supported only
  on systems with VGX, VGXT, RealityEngine, RealityEngine2, Elan, XS,
  Extreme, and Impact graphics hardware. On other systems,
  pfVClockSync returns immediately. Because libpf normally uses
  pfVClockSync for frame rate control, frame control is not rigorous
  on other platforms.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA




Top Document: SGI performer Frequently Asked Questions (FAQ)
Previous Document: -36- Gangdraw and cursor loading
Next Document: -38- Timing on pre-1992 platforms

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)





Last Update March 27 2014 @ 02:12 PM