Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI hardware Frequently Asked Questions (FAQ)
Section - -58- What high speed interfaces are available for Onyx?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Cities ]


Top Document: SGI hardware Frequently Asked Questions (FAQ)
Previous Document: -57- What are the differences between the Indigo R4000 and Indigo2?
Next Document: -59- Why doesn't my modem work?
See reader questions & answers on this topic! - Help others by sharing your knowledge

  Robert van Liere <robertl@cwi.nl> writes:
  SGI have FDDI boards for the Onyx. These boards perform quite well
  although the Indigo FDDI broad preforms slightly better. I'm not sure
  about SGI ATM, although I guess all vendors are preparing for it.

  FORE systems make ATM boards for the GIO bus. Maybe they have
  something for the HIO as well.

  		FORE systems, Inc
  		1000 Gamma Drive
  		Pittsburgh, PA 15238-2940
  		724-742-4444
  		Fax 412-967-4044
  		info@fore.com

  		GIA-100/125A	(100 Mbps GIO Bus)
  		GIA-100/175A	(140 Mbps GIO Bus)
  		
  and Yechezkal-Shimon Gutfreund <sgutfreund@gte.com> adds:
  Fore Systems, Pittsburgh PA, selles a 150Mbit/s ATM adapter card that
  you can use to connect to their ATM switch (using multi-mode fiber).

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA




Top Document: SGI hardware Frequently Asked Questions (FAQ)
Previous Document: -57- What are the differences between the Indigo R4000 and Indigo2?
Next Document: -59- Why doesn't my modem work?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)





Last Update March 27 2014 @ 02:12 PM