Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI admin Frequently Asked Questions (FAQ)
Section - -62- Why can't Ultrix automount SGI filesystems?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Airports ]


Top Document: SGI admin Frequently Asked Questions (FAQ)
Previous Document: -61- Why can't I export an NFS-mounted filesystem?
Next Document: -63- Why does 'tar' work strangely on a filesystem mounted from an SGI?
See reader questions & answers on this topic! - Help others by sharing your knowledge

  Ultrix's automount uses an "untrusted" port for mount requests. Add
  an '-n' to the mountd lines in /usr/etc/inetd.conf (/etc/inetd.conf
  in IRIX 5.x), like so:

  mountd/1    stream  rpc/tcp wait    root    /usr/etc/rpc.mountd     mountd -n
  mountd/1    dgram   rpc/udp wait    root    /usr/etc/rpc.mountd     mountd -n

  then 'killall mountd' and 'killall -HUP inetd' or reboot.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: SGI admin Frequently Asked Questions (FAQ)
Previous Document: -61- Why can't I export an NFS-mounted filesystem?
Next Document: -63- Why does 'tar' work strangely on a filesystem mounted from an SGI?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)




Last Update March 27 2014 @ 02:12 PM