Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

SGI admin Frequently Asked Questions (FAQ)
Section - -19- How can I boot directly into single-user mode?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Sex offenders ]


Top Document: SGI admin Frequently Asked Questions (FAQ)
Previous Document: -18- BOOTING
Next Document: -20- How can I boot from a non-default disk?
See reader questions & answers on this topic! - Help others by sharing your knowledge

  Use the PROM monitor's 'single' command.

  For machines earlier than 4D35s, whose PROMs don't have that command,
  first boot into sash from the PROM monitor with "boot", then type
  "boot initstate=s".

User Contributions:

Comment about this article, ask questions, or add new information about this topic:



Top Document: SGI admin Frequently Asked Questions (FAQ)
Previous Document: -18- BOOTING
Next Document: -20- How can I boot from a non-default disk?

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
sgi-faq@viz.tamu.edu (The SGI FAQ group)




Last Update March 27 2014 @ 02:12 PM