Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

Compaq Contura Aero Frequently Asked Questions
Section - 2.1.5.3 What if my screen is unevenly backlit?

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Forum ]


Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 2.1.5.2 The screen connection
Next Document: 2.1.5.4 800x600x16 VGA mode
See reader questions & answers on this topic! - Help others by sharing your knowledge
[C] The first one I got had a real uneven screen with a "swirling vortex" of
darkness in the upper left. I returned it for this, and the replacement is MUCH
better. I think that the assemblers used their fingers a lot on the screen when
they assembled them. If you get a nice soft wide FLAT object and rub it across
the screen you can smooth this out somewhat. If you poke your finger on the
screen it will mush out the "LIQUID" in the LCD, and make the screen lighter at
that point. You can use this to your advantage to "even" out the liquid a
little bit. Mine was really spotty from the assemblers fingers, but looks MUCH
better now.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA




Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 2.1.5.2 The screen connection
Next Document: 2.1.5.4 800x600x16 VGA mode

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
Philip Wilk <PWilk-aerofaq@ZenSpider.com>





Last Update March 27 2014 @ 02:12 PM