|
Top Document: Compaq Contura Aero Frequently Asked Questions Previous Document: 3.3.6.4 Installation without Floppy Next Document: 3.3.6.6 X-configuration for mono See reader questions & answers on this topic! - Help others by sharing your knowledge
This is a condensed version of the Xconfig file. This should work with the
VGA16 server (as well as VGA2).
--- begin file ---
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
ServerNumLock
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
Emulate3Buttons
EndSection
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-50
VertRefresh 50-70
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
Modeline "640x480A" 28.322 640 680 720 864 480 488 491 521
EndSection
Section "Device"
Identifier "Generic VGA"
EndSection
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "My Monitor"
Subsection "Display"
Modes "640x480" "640x400" "640x480A"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "My Monitor"
Subsection "Display"
Modes "640x480" "640x480A" "640x400"
ViewPort 0 0
Virtual 640 480
EndSubsection
EndSection
User Contributions:Top Document: Compaq Contura Aero Frequently Asked Questions Previous Document: 3.3.6.4 Installation without Floppy Next Document: 3.3.6.6 X-configuration for mono Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: Philip Wilk <PWilk-aerofaq@ZenSpider.com>
Last Update March 27 2014 @ 02:12 PM
|

Comment about this article, ask questions, or add new information about this topic: