Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

Compaq Contura Aero Frequently Asked Questions
Section - 3.3.2.7 Windows for Workgroups

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Cities ]


Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 3.3.2.6 32 bit disk access or no?
Next Document: 3.3.2.8 Speaker Driver
See reader questions & answers on this topic! - Help others by sharing your knowledge
It appears that Windows for Workgroups 3.11 works on the Aero. 32-bit file
access also appears to work without a problem.

[Q] WFWG Hangs my Aero. Anyone else have this problem? It seems to work fine
though setup, but then it hangs on restart.

[A] You have to get a new keyboard-driver. It's called CPQVKB.386, and can be
found at ftp://ftp.compaq.com/pub/softpaq/sp0501-1000/sp0738.zip. To install 
the cpqvkd.386 device driver:

1.  Exit Windows.
2.  Copy CPQVKD.386 to your WINDOWS\SYSTEM directory.
3.  In the \WINDOWS\SYSTEM directory, use any text editor such
    as DOS Edit to change the following line in the [386Enh]
    section of the SYSTEM.INI file:
        keyboard=*vkd
    to
        keyboard=cpqvkd.386
4.  Save the SYSTEM.INI file.
5.  Restart Windows so the change takes effect.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA




Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 3.3.2.6 32 bit disk access or no?
Next Document: 3.3.2.8 Speaker Driver

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
Philip Wilk <PWilk-aerofaq@ZenSpider.com>





Last Update March 27 2014 @ 02:12 PM