Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

Compaq Contura Aero Frequently Asked Questions
Section - 3.2.2.1 Problems when Power-up from standby

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Forum ]


Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 3.2.2 Power-Management
Next Document: 3.2.2.2 PCMCIA modems and Suspend/Resume crashing
See reader questions & answers on this topic! - Help others by sharing your knowledge
[Q] When I power back up from standby (in Windows) the mouse doesn't work again
unless I quit and restart Windows. Keyboard commands are fine, but the mouse is
frozen. This only happens after it has been in standby.

[A] The mouse problem is something inherent to the aero. To avoid it, don't
touch the mouse till you have come all the way out of standyby after hitting
the purple(tm) button. It should be OK then.

[Q] After starting up again from hibernation (ie., when I failed to get the
power plugged in at the very short power out warning :-( ), the screen blanks
out every few seconds. Only way to stop it is to reboot. Do others get this?

User Contributions:

Comment about this article, ask questions, or add new information about this topic:




Top Document: Compaq Contura Aero Frequently Asked Questions
Previous Document: 3.2.2 Power-Management
Next Document: 3.2.2.2 PCMCIA modems and Suspend/Resume crashing

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
Philip Wilk <PWilk-aerofaq@ZenSpider.com>





Last Update March 27 2014 @ 02:12 PM