Search the FAQ Archives

3 - A - B - C - D - E - F - G - H - I - J - K - L - M
N - O - P - Q - R - S - T - U - V - W - X - Y - Z
faqs.org - Internet FAQ Archives

MH Frequently Asked Questions (FAQ) with Answers
Section - 06.05 Fixing "post: problem initializing server; [RPLY] 503 Sender already specified"

( Single Page )
[ Usenet FAQs | Web FAQs | Documents | RFC Index | Cities ]


Top Document: MH Frequently Asked Questions (FAQ) with Answers
Previous Document: 06.04 Fixing "post: problem initializing server; [BHST] no servers available"
Next Document: 06.06 Fixing "post: unexpected response; [BHST] no socket opened"
See reader questions & answers on this topic! - Help others by sharing your knowledge
Date: Mon, 1 Mar 1993 00:00:00 -0800

  The problem in sendmail is that the RSET after the ONEX does not
  reset all the state information.  Normally sendmail fork()s after
  the Mail from: statement and a RSET causes that child to exit. This
  automatically cleans up.  If the fork() is suppressed by ONEX, then
  the source must be modified to do the cleanup.  See "srvrsmtp.c
  patch" in the Appendix.  If you don't have the sources, modify your
  MH sources to not use the ONEX verb.

User Contributions:

Comment about this article, ask questions, or add new information about this topic:

CAPTCHA



Top Document: MH Frequently Asked Questions (FAQ) with Answers
Previous Document: 06.04 Fixing "post: problem initializing server; [BHST] no servers available"
Next Document: 06.06 Fixing "post: unexpected response; [BHST] no socket opened"

Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
Bill Wohler <wohler@newt.com>




Last Update April 10 2012 @ 05:37 AM