Part1 - Part2 - Part3 - Part4 - Part5 - Single Page

Top Document: Rec.Bicycles Frequently Asked Questions Posting Part 3/5
Previous Document: 8d.3 Adjusting Chain Length
Next Document: 8d.5 SACHS Power-links


[ Usenet FAQs | Search | Web FAQs | Documents | RFC Index ]

8d.4 Hyperglide chains


For those of you that are tired of dealing with Shimano's
chains with the special pins, I've found that the following
chains work well with Shimano Hyperglide gearing systems:

DID SuperShift
Sedis ATB
Union 800
Union 915

The SuperShift is probably the best performer of the bunch,
followed by the ATB and 915.  The 800 doesn't do too well
with narrow cogsets (i.e., 8-speeds) because the raised
elliptical bumps on the side-plates tend to rub on the adjacent
cogs.

I've also found that these chains work well on SunTour systems.
The 915, however, works better on PowerFlo cogs than it does
on regular (AccuShift) cogs (where it tends to slip when shifting).



Top Document: Rec.Bicycles Frequently Asked Questions Posting Part 3/5
Previous Document: 8d.3 Adjusting Chain Length
Next Document: 8d.5 SACHS Power-links

Part1 - Part2 - Part3 - Part4 - Part5 - Single Page


[ Usenet FAQs | Search | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
iglesias@draco.acs.uci.edu (Mike Iglesias)

Last Update May 13 2007 @ 00:21 AM