|
Top Document: Rec.Bicycles Frequently Asked Questions Posting Part 2/5 Previous Document: 8a.2 Using a Quick Release Next Document: 8a.4 Workstands 2 See reader questions & answers on this topic! - Help others by sharing your knowledge There are a variety of workstands available, from about $30 to over $130. Look at the mail order catalogs for photos showing the different types. The type with a clamp that holds one of the tubes on the bike are the nicest and easy to use. Park has a couple of models, and their clamp is the lever type (pull the lever to lock the clamp). Blackburn and Performance have the screw type clamp (screw the clamp shut on the tube. If you have a low budget, you can use two pieces of rope hanging from the ceiling with rubber coated hooks on the end - just hang the bike by the top tube. This is not as steady as a workstand, but will do an adequate job. Top Document: Rec.Bicycles Frequently Asked Questions Posting Part 2/5 Previous Document: 8a.2 Using a Quick Release Next Document: 8a.4 Workstands 2 Part1 - Part2 - Part3 - Part4 - Part5 - Single Page [ Usenet FAQs | Web FAQs | Documents | RFC Index ] Send corrections/additions to the FAQ Maintainer: iglesias@draco.acs.uci.edu (Mike Iglesias)
Last Update November 21 2011 @ 12:58 AM
|
