United States International Trade Commision Rulings And Harmonized Tariff Schedule

faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers

faqs.org > Rulings and Tariffs Home > Tariff Numbers > 4412.92.40 - 4503.10.60 > 4418.90.40

Previous Tariff (4418.90.25 - Builders' joinery and carpentry of wood, drilled or notched lumber studs)
Next Tariff (4418.90.45 - Builders' joinery and carpentry of wood, including cellular wood panels, nesoi)

HTS Number: 4418.90.40

Description: Builders' joinery and carpentry of wood, including cellular wood panels, nesi
MFN Duty Rate: 3.2%

Previous Tariff (4418.90.25 - Builders' joinery and carpentry of wood, drilled or notched lumber studs)
Next Tariff (4418.90.45 - Builders' joinery and carpentry of wood, including cellular wood panels, nesoi)

Related Rulings:

• 1990 HQ 0083731 - Classification of drilled lumber sent to Canada to be microincised and pressure treated with a preservative
• 1990 HQ 0083732 - Classification of drilled lumber sent to Canada to be microincised and pressure treated with a preservative
• 1990 HQ 0083733 - Tariff classification of drilled lumber sent to Canada to be microincised and pressure treated with a preserative
• 1990 HQ 0087616 - United States-Canada Free Trade Agreement duty free status under Chapter 99 of the Harmonized Tariff Schedule of the United States Annotated for laminated wood and finger- jointed hemlock handrails, hemlock "turning squares", laminated and bullnosed hemlock stair treads, and laminated shoerails; builders' joinery and carpentry of wood, articles of wood, edge-glued lumber, pressure treated lumber, finger-jointed lumber
• 1991 HQ 0088284 - Parallam PSL; parallel strand lumber; builders' joinery and carpentry of wood. Parallam PSL is not lumber for the purposes of subheading 9905.44.10.
• 1991 HQ 0088294 - Finger jointed pine jamb sets; Door jamb; Finger jointed wood; Builders' joinery and carpentry of wood; Finger- jointed builders' joinery; United States-Canada Free Trade Agreement.
• 1991 NY 0861959 - The tariff classification of stained siding and fence panels from Canada
• 1993 HQ 0086255 - Reconsideration of NYRL 844464 dated August 29, 1989; "Laminated Veneer Lumber"
• 1993 HQ 0086256 - Tariff Classification of Laminated Veneer Lumber
• 1993 HQ 0088051 - Wall panel system
• 1993 HQ 0556373 - Application for Further Review of Protest No. 3004-90- 000301; meranti lumber core jambs; GSP; imported directly
• 1994 HQ 0086255 - Reconsideration of NYRL 844464 dated August 29, 1989; "Laminated Veneer Lumber"
• 1994 HQ 0086256 - Tariff Classification of Laminated Veneer Lumber
• 1994 HQ 0952940 - Decision on Application for Further Review of Protest No. 3604-92-100001; wood worked along the edges excluded from heading 4409, HTSUSA; proper classification, heading 4418, HTSUSA.
• 1994 HQ 0955712 - Application for further review of protest no. 0712-93-101343; classification of wood flooring; edge worked; end worked; tongued and grooved
• 1994 NY 802028 - Tariff classification of staircase components (regular steps, connection steps, angle steps, handrails, fillets, shoe rails) from Canada
• 1994 NY 880658 - The tariff classification of primed combed spruce facia board from Canada
• 1994 NY 893478 - The tariff classification of wood balusters from Indonesia
• 1994 NY 893479 - The tariff classification of primed wooden balusters from Indonesia
• 1994 NY 893697 - The tariff classification of carpet fasteners (tackstrips), made of plywood, pins and nails, from England.
• 1994 NY 893902 - Tariff classification of solid wood flooring worked on the edges and ends from Australia
• 1995 HQ 954220 - Parts of kitchen cabinets; doors, drawer fronts and cabinet faceframes; Note 1(o), Chapter 44; 4418.90.4090; EN 44.18; builders' fittings for cupboards to be built into walls; parts of furniture; Note 2, Chapter 94; EN 94.03
• 1995 HQ 955712 - Application for further review of protest no. 0712-93- 101343; classification of wood flooring; edge worked; end worked; tongued and grooved
• 1995 HQ 956363 - Reconsideration of NYRL 893902; classification of hardwood flooring; tongued and grooved on the edges and ends; HRL 955712; HRL 952940; builders' carpentry and joinery of wood
• 1995 NY 803538 - The tariff classification of primed broken knife planer board from Canada
• 1995 NY 806012 - The tariff classification of components for prefabricated conservatories from the United Kingdom, Indonesia and other countries
• 1995 NY 806016 - The tariff classification of wooden trusses assembled in Mexico.
• 1995 NY 806603 - The tariff classification of wood flooring from Sweden.
• 1995 NY 807854 - The tariff classification of door frames and sidelight frames made of laminated wood from Canada
• 1995 NY 812223 - The tariff classification of rafters and other wooden components for a prefabricated conservatory from Malaysia and of a solar powered ceiling vent from the United Kingdom
• 1995 NY 813011 - The tariff classification of wood flooring and lumber from Vietnam.
• 1996 NY 815420 - The tariff classification of finger-jointed pine blanks, door jamb moldings and parts of frames for doors from Canada
• 1996 NY 815464 - The tariff classification of oak fittings for handrails from China
• 1996 NY 815569 - The tariff classification of wooden "spindles" designed to be used as stair parts from the United Kingdom
• 1996 NY 817389 - The tariff classification of veneered door jamb moldings from Malaysia
• 1996 NY 817990 - The tariff classification of a door jamb molding with a cutout for a strike plate or for a hinge and of a brickmould molding with an angle cut at one end from Canada
• 1996 NY A82523 - The tariff classification of pine door jambs, hinge stiles, lock or latch stiles and door rails from Canada
• 1996 NY A82656 - The tariff classification of a door frame molding made of plywood and with added wood edges and an additional veneer surface from Indonesia
• 1996 NY A84640 - The tariff classification of parquet flooring and staircase spindles and posts from Slovakia.
• 1996 NY A84670 - The tariff classification of Pine Corner Brackets from Canada
• 1996 NY A84764 - The tariff classification of wood paneling from Norway.
• 1996 NY A85553 - The tariff classification of fabricated wooden studs from Canada.
• 1996 NY A85712 - The tariff classification of nailing strips, square balusters, bevelled balusters and moldings for deck rails from Canada
• 1997 NY 802028 - Tariff classification of staircase components (regular steps, connection steps, angle steps, handrails, fillets, shoe rails) from Canada
• 1997 NY 816080 - The tariff classification of wood handrails, deck and porch posts, bottom rails, stringers, steps and related articles, from Canada; pressure treated lumber; builders' joinery.
• 1997 NY 880658 - The tariff classification of primed combed spruce facia board from Canada
• 1997 NY 888696 - The tariff classification of wooden window supports from Brazil
• 1997 NY 893478 - The tariff classification of wood balusters from Indonesia
• 1997 NY 893479 - The tariff classification of primed wooden balusters from Indonesia
• 1997 NY 893697 - The tariff classification of carpet fasteners (tackstrips), made of plywood, pins and nails, from England.
• 1997 NY 893902 - Tariff classification of solid wood flooring worked on the edges and ends from Australia
• 1997 NY 896800 - The tariff classification of wooden balusters from Canada
• 1997 NY A89572 - The tariff classification of bevelled deck posts, steps with rounded ends and decorative deck boards from Canada
• 1997 NY A89854 - The tariff classification of deck panels and a gazebo kit from Canada
• 1997 NY B80371 - The tariff classification of fabricated wooden studs from Canada.
• 1997 NY B80485 - The tariff classification of door jambs made of plywood with veneered edges from Indonesia
• 1997 NY B80541 - The tariff classification of floor joist bridging with ends cut at an angle from Canada
• 1997 NY B80908 - The tariff classification of finger-jointed pine door jamb moldings worked on the ends and finger-jointed pine door stiles worked on the ends from Canada; applicability of 9905.44.10 and 9905.44.15
• 1997 NY B81359 - The tariff classification of truss components from Canada
• 1997 NY B81564 - The tariff classification of drilled softwood studs from Canada
• 1997 NY B83257 - The tariff classification of wooden fireplace mantles from Ireland.
• 1997 NY B85410 - The tariff classification of door jamb, casing and base board moldings from Ghana
• 1997 NY B85796 - The tariff classification of notched lumber from Canada.
• 1997 NY B88564 - The tariff classification of truss components consisting of softwood lumber pieces with angle cut ends and pieces with square cut ends from Canada
• 1998 NY 880658 - The tariff classification of primed combed spruce facia board from Canada
• 1998 NY 888696 - The tariff classification of wooden window supports from Brazil
• 1998 NY B80908 - The tariff classification of finger-jointed pine door jamb moldings worked on the ends and finger-jointed pine door stiles worked on the ends from Canada; applicability of 9905.44.10 and 9905.44.15
• 1998 NY B81564 - The tariff classification of drilled softwood studs from Canada
• 1998 NY B82186 - The tariff classification of wood bridging systems from Canada.
• 1998 NY B82545 - The tariff classification of studs with a cutout for wiring from Canada
• 1998 NY B89813 - The tariff classification of pre-machined wood wall components (notched studs) from Canada
• 1998 NY C81826 - The tariff classification of reinforced lumber from Canada.
• 1998 NY C82044 - The tariff classification of notched (having a crosscut dado) wall components from Canada
• 1998 NY C82807 - The tariff classification of wood roof and floor truss components from Canada
• 1998 NY C89668 - The tariff classification of unassembled wood trusses from Canada
• 1998 NY D80342 - The tariff classification of unassembled wood trusses from Canada
• 1998 NY D81970 - The tariff classification of unassembled wood trusses from Canada
• 1998 NY NY1391 - The tariff classification of wooden balusters and of metal balusters from Indonesia and from China
• 1998 NY NY32 - The tariff classification of wood handrails, deck and porch posts, bottom rails, stringers, steps and related articles, from Canada; pressure treated lumber; builders' joinery.
• 1999 NY C87936 - The tariff classification of “Twincore Joists” (wood beams with two particle board cores) from Canada
• 1999 NY D83314 - The tariff classification of “SIM JOIST” (a floor joist composed of nine pieces of wood) from Canada
• 1999 NY D86668 - The tariff classification of laminated stair treads, doorsills and thresholds (made of edge-glued lumber) from Canada
• 1999 NY D88087 - The tariff classification of laminated post blanks and laminated handrails made of face glued lumber from Canada
• 1999 NY D89501 - The tariff classification of unassembled wooden wall sections from Canada.
• 1999 NY E80694 - The tariff classification of wooden cupolas from Canada
• 1999 NY E84554 - The tariff classification of assembled roof trusses, assembled “adjustable-end space joists” and oriented strand rimboards from Canada
• 1999 NY E85618 - The tariff classification of fabricated wood members for wall construction, from Canada.
• 1999 NY E87772 - The tariff classification of a "Bow Truss" that is used in the assembly of a Recreational Vehicle from Ontario, Canada
• 1999 NY E89187 - The tariff classification of wood flooring from Indonesia, Guatemala, Bolivia, Brazil, Paraguay, Mexico and Australia
• 2000 NY F84037 - The tariff classification of laminated wall studs and ceiling framing members (“Lamstuds”) from Canada
• 2000 NY F88343 - The tariff classification of carved wooden arches, pillars, columns and wall panels from India
• 2000 NY G81559 - The tariff classification of fireplace mantel surround units vent cover kits, upper shelf units and side cabinets from Canada
• 2000 NY G83061 - The tariff classification of lathe-turned coped building logs from Canada
• 2000 NY G83563 - The tariff classification of solid hardwood floor planks and strips from China
• 2001 HQ 963876 - Protest Number 0712-00-100107; classification of angle cut lumber; heading 4407; heading 4418; truss components
• 2001 HQ 964427 - Classification of Stained Cedar Siding; NY 861959; 19 U.S.C. §1625(c)
• 2001 HQ 964568 - Modification of NY 806603 regarding the tariff classification of laminated wood flooring; headings 4412 and 4418
• 2001 HQ 964825 - Application for Further Review of Protest No. 3001-01-100006; Seattle File Number: PRO-4 SE:TCP:SJ
• 2001 HQ 965083 - Application for Further Review of Protest No.: 1101-00-100164.
• 2001 NY D87666 - The tariff classification of combed fascia boards from Canada
• 2001 NY D87805 - The tariff classification of wooden boards to be used as material for truss components, from Canada.
• 2001 NY E87773 - The tariff classification of wooden roof truss components (“Turb-O-Webs”) from Canada.
• 2001 NY H83517 - The tariff classification of solid wood flooring planks from Germany.
• 2002 HQ 961848 - Protest number 1101-96-100564; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS
• 2002 HQ 964510 - Application for Further Review of Protest Number 3307-99-100031; Wood Flooring; Heading 4412; Heading 4418
• 2002 HQ 964683 - Internal Advice Memorandum Dated: September 22, 2000; Headings 4412 and 4418, HTSUS; Laminated Wood; Cellular Wood Panels.
• 2002 HQ 965179 - Protest number 1704-01-100117; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS; Laminated flooring; Headings 4412 and 4418
• 2002 HQ 965262 - Protest number 3004-01-100052; 19 U.S.C. §1515(b); 19 CFR §174.22(d); Protest Deemed Denied
• 2002 HQ 965428 - Protest number 5201-01-100970; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS
• 2002 NY H86827 - The tariff classification of solid pine panels with tongued and grooved edges and ends from Canada
• 2002 NY I82891 - The tariff classification and status under the North American Free Trade Agreement (NAFTA), of “Turb-O-Web” truss components from Canada; Article 509
• 2003 HQ 965083 - Application for Further Review of Protest No.: 1101-00-100164.
• 2003 HQ 965877 - Application for Further Review of Protest Number 1703-02-100124; Fiberboard Flooring and Molding; Subheading 4411.19.4000; Subheading 4411.29.9000
• 2003 HQ 966437 - Decision on Application for Further Review of Protest 3801-01-100736; Classification of grooved lumber from Canada; Heading 4409
• 2007 HQ W968306 - Classification of laminated veneer lumber; HQ 086255 revoked
• 2007 HQ W968307 - Classification of laminated veneer lumber; HQ 086256 revoked