United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2002 NY Rulings > NY I84934 - NY I84981 > NY I84968

Previous Ruling Next Ruling
NY I84968





September 10, 2002

CLA2-RR:NC:3:353 I84968

CATEGORY: CLASSIFICATION

Mr. Jarrod Mills
Standard Textile
One Knollcrest Drive
P.O. Box 371805
Cincinnati, OH 45222-1805

RE: Classification and country of origin determination for woven jackets and a jacket liner; United States - Israel Free Trade Agreement; 19 CFR Section 12.130; 19 C.F.R. Section 102.21; and General Note 8, HTS.

Dear Mr. Mills:

This is in reply to your letter dated August 9, 2002, requesting a classification and country of origin determination for jackets and a liner which will be imported into the United States.

FACTS:

The subject merchandise consists of Styles 677, 970, 971 and 974 unisex work jackets and Style 872 unisex jacket liner. Styles 677, 970 and 971 are constructed of an outer shell of woven 65% polyester, 35% cotton fabric with a 100% nylon liner. The filler is 100% polyurethane with 100% polypropylene backing. All feature a zipper closure. Style 677 features a 100% polyester rib knit fabric cuff, waistband and collar, two side slash pockets at the waist and a triceps pencil pocket. Style 970 is hip-length and features cuffs with buttons, two side slash pockets at the waist and a triceps pencil pocket. Style 971 is Eisenhower-style and features cuffs with buttons, an adjustable button waist and two patch pockets with button flaps at the chest. Style 974 is constructed of an outer shell of woven 65% polyester, 35% cotton fabric and is unlined. It features a 100% polyester rib knit fabric cuff, waistband and collar, two side slash pockets at the waist and a triceps pencil pocket. Style 872 is a liner made to zip into the shell of jacket Style 974 and is constructed of a woven 100% nylon shell with 100% polyurethane filler and a 100% polypropylene backing. You state that the liner will be imported separately and sold separately from the Style 974 jacket.

The manufacturing operations for the jackets and liner are as follows: the fabric is woven in China, then shipped to Israel, where it is cut into jacket and liner components. The components are then shipped to Jordan (QIZ) for assembly into jackets or liner, finishing operations are performed (including attaching the zipper).

ISSUE:

What are the classification and country of origin of the subject merchandise?

CLASSIFICATION:

The applicable subheading for Styles 677, 970, 971 and 974 unisex work jackets will be 6202.93.5011, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for “Women's or girls' overcoats, carcoats, capes, cloaks, anoraks (including ski-jackets), windbreakers and similar articles (including padded, sleeveless jackets), other than those of heading 6204: Anoraks (including ski-jackets), windbreakers and similar articles (including padded, sleeveless jackets): Of man-made fibers: Other: Other: Other: Other, Women’s.” The rate of duty will be 28.1% ad valorem. The textile category designation is 635.

The applicable subheading for the Style 872 unisex jacket liner will be 6217.10.9530, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for “Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212: Accessories: Other: Other, Of man-made fibers.” The rate of duty will be 14.8% ad valorem. The textile category designation is 659.

The designated textile and apparel categories and their quota and visa status are the result of international agreements that are subject to frequent renegotiations and changes. To obtain the most current information, we suggest that you check, close to the time of shipment, the U.S. Customs Service Textile Status Report, an internal issuance of the U.S. Customs Service, which is available at the Customs Web Site at WWW.CUSTOMS.GOV. In addition, the designated textile and apparel categories may be subdivided into parts. If so, visa and quota requirements applicable to the subject merchandise may be affected and should also be verified at the time of shipment.

COUNTRY OF ORIGIN - LAW AND ANALYSIS:

On December 8, 1994, the President signed into law the Uruguay Round Agreements Act. Section 334 of that Act (codified at 19 U.S.C. 3592) provides new rules of origin for textiles and apparel entered, or withdrawn from warehouse, for consumption, on and after July 1, 1996. On September 5, 1995, Customs published Section 102.21, Customs Regulations, in the Federal Register, implementing Section 334 (60 FR 46188). Thus, effective July 1, 1996, the country of origin of a textile or apparel product shall be determined by sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.

EXCEPTION FOR UNITED STATES-ISRAEL FREE TRADE AGREEMENT:

You have stated that the woven fabric is cut into jacket and liner parts in Israel. Section 334(b)(5) of the Uruguay Round Agreements Act provides that:

This section shall not affect, for purposes of the customs laws and administration of quantitative restrictions, the status of goods that, under rulings and administrative practices in effect immediately before the enactment of this Act, would have originated in, or been the growth, product or manufacture of, a country that is a party to an agreement with the United States establishing a free trade area, which entered into force before January 1, 1987. For such purposes, such rulings and administrative practices that were applied, immediately before the enactment of this Act, to determine the origin of textile and apparel products covered by such agreement shall continue to apply after the enactment of this Act, and on and after the effective date described in subsection (c), unless such rulings and practices are modified by the mutual consent of the parties to the agreement.

Israel is the only country which qualifies under the terms of Section 334(b)(5). As the Section 334 rules of origin for textiles and apparel products do not apply to Israel, we refer to the 19 C.F.R. §12.130 rules of origin, the rules of origin applicable to textiles and textile products before the enactment of Section 334. Section 334(b)(5) makes clear that if country of origin was conferred in Israel under Section 12.130, Israel will now be accorded the same treatment. This interpretation of Section 334(b)(5) was confirmed in a Notice of a general statement of policy, Treasury Decision 96-58, appearing in the Federal Register, Vol. 61, No. 148, dated July 31, 1996.

Accordingly, applying Section 12.130(b), the standard of substantial transformation governs the country of origin determination where textiles and textile products are processed in more than one country. The country of origin of textile products is deemed to be that foreign territory or country where the articles last underwent a substantial transformation. Substantial transformation is said to occur when the article has been transformed into a new and different article of commerce by means of substantial manufacturing or processing.

Section 12.130(d) sets forth criteria for determining whether a substantial transformation of a textile product has taken place. These criteria are not exhaustive; one or any combination of criteria may be determinative, and additional factors may be considered.

Section 12.130(d)(1) states that a new and different article of commerce will usually result from a manufacturing or processing operation if there is a change in:

(i) Commercial designation or identity, (ii) Fundamental character, or (iii) Commercial use.

Section 12.130(d)(2) states that for determining whether the merchandise has been subjected to substantial manufacturing or processing operations, the following will be considered:

(i)The physical change in the material or article; (ii) The time involved in the manufacturing or processing; (iii) The complexity of the manufacturing or processing; (iv) The level or degree of skill and/or technology required in the manufacturing or processing operations; (v) The value added to the article or material.

Section 12.130(e)(1) states, in pertinent part, that an article will usually be a product of a particular country when it has undergone in that country:

(iv) Cutting of the fabric into parts and the assembly of these parts into the completed article; or (v) Substantial assembly by sewing and/or tailoring of all cut pieces of apparel articles which were cut from the fabric in another country into a component garment. (e.g., the complete assembly and tailoring of all cut pieces of a suit-type jacket, suit or a shirt).

Customs has consistently held that the cutting of fabric into garment parts is a substantial transformation of the fabric and that those garment parts become the product of the country in which they are cut. It is also the consistently held position of Customs that when garment parts are cut in one country but the garment is assembled in another country, unless the assembly operation is a substantial assembly such as that referred to in Section 12.130(e)(1)(v), the country or origin remains the country in which the garment parts are cut. See, for example, HRL 088235, dated March 15, 1991, and the rulings which are cited in that ruling.

. Since in this case fabric is cut into garment parts in Israel, Israel is the country of origin of the jacket. This is because in Israel the fabric is substantially transformed into garment parts which are designated for a particular article of apparel, thereby creating a new and different article of commerce. The mere assembly of goods, on the other hand, is not enough to substantially transform the components of an article into a new and different article of commerce.

HOLDING:

The country of origin of the jackets and liner is Israel. Based upon international textile trade agreements products of Israel are not subject to quota or the requirement of a visa.

The holding set forth above applies only to the specific factual situation and merchandise identified in the ruling request. This position is clearly set forth in section 19 CFR 177.9(b)(1). This section states that a ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect.

This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). Should it be subsequently determined that the information furnished is not complete and does not comply with 19 CFR 177.9(b)(1), the ruling will be subject to modification or revocation. In the event there is a change in the facts previously furnished, this may affect the determination of country of origin. Accordingly, if there is any change in the facts submitted to Customs, it is recommended that a new ruling request be submitted in accordance with 19 CFR 177.2.

A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kenneth Reidlinger at 646-733-3053.

Sincerely,

Robert B. Swierupski
Director,

Previous Ruling Next Ruling

See also: