United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 2001 HQ Rulings > HQ 963686 - HQ 963822 > HQ 963724

Previous Ruling Next Ruling
HQ 963724





May 17, 2001

CLA-2 RR:CR:GC 963724ptl

CATEGORY: CLASSIFICATION

TARIFF NO.: 3924.90.55

Ms Helen Newell
Polardreams International, Inc.
1948 Hwy 1, North
Fairfield, IA 52556

RE: PVC eye mask.

Dear Ms. Newell:

This is in reference to your letter dated April 21, 1999, to the Director, National Commodity Specialist Division, New York, requesting classification under the Harmonized Tariff Schedule of the United States (HTSUS), of three versions of a product referred to as a PVC eye mask.

Your letter was referred to this office for response. We regret the delay.

FACTS:

The plastic eye masks are made of an outside PVC shell which is filled with colored distilled water (due to the presence of a dye). The mask can be heated by putting it in hot water, or chilled by placing it in a refrigerator. The mask has two oblong eye holes. The user places the mask over his or her eyes and secures it by using a permanently attached plastic straps (which are extensions of the mask) which have Velcro-like hook and loop fastening straps attached to the ends. The mask is claimed to relieve stuffed nasal passages, tired or puffy eyes, excessive exposure to the sun, and other head discomforts.

Your request states that the masks will be sold as a part of a gift set and not sold separately. However, since we have no information about any other possible components of the gift set, this ruling will only concern the classification of the mask.

ISSUE:

What is the classification of a liquid filled plastic eye mask?

LAW AND ANALYSIS:

Merchandise is classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) in accordance with the General Rules of Interpretation (GRIs). The systematic detail of the HTSUS is such that virtually all goods are classified by application of GRI 1, that is, according to the terms of the headings of the tariff schedule and any relative Section or Chapter Notes. In the event that the goods cannot be classified solely on the basis of GRI 1, and if the headings and legal notes do not otherwise require, the remaining GRIs may then be applied in order.

In understanding the language of the HTSUS, the Harmonized Commodity Description and Coding System Explanatory Notes may be utilized. The Explanatory Notes (ENs), although not dispositive or legally binding, provide a commentary on the scope of each heading of the HTSUS, and are the official interpretation of the Harmonized System at the international level. See T.D. 89-80, 54 Fed. Reg. 35127, 35128 (August 23, 1989).

The HTSUS headings under consideration are as follows:

2201 Waters, including natural or artificial mineral waters and aerated waters, not containing added sugar or other sweetening matter nor flavored; ice and snow:

3005 Wadding, gauze, bandages and similar articles (for example, dressings, adhesive plasters, poultices), impregnated or coated with pharmaceutical substances or put up in forms or packings for retail sale for medical, surgical, dental or veterinary purposes:

3005.90 Other:

3005.90.50 Other

3005.90.5090 Other

3824 Prepared binders for foundry molds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included: 3824.90 Other:

Other:

Other

Other

Other

3824.90.9050 Other

3924 Tableware, kitchenware, other household articles and toilet articles, of plastics:

3924.90 Other:

3924.90.55 Other.

As stated above, the GRIs are to be applied in order. GRI 1 provides that articles are to be classified by the terms of the headings and any relevant Section and Chapter Notes. For an article to be classified is a particular heading, that heading must describe the article.

Although the vinyl plastic eye masks are claimed to provide relief and other benefits because of their ability to provide a cooling or heating treatment to the user, they do not rise to the level of dressings, adhesive plasters or poultices contemplated by heading 3005, HTSUS. The ENs to heading 30.05 indicate that in order to be included within the coverage of that heading, the articles must be some type of bandage, wadding or gauze for dressings which has been specially treated and which is clearly intended for the medical, surgical, dental or veterinary purpose of being applied to a wound or bodily injury. The vinyl plastic eye masks are not this type of medical product. Thus, they cannot be classified in subheading 3005, HTSUS.

Because the eye masks are composite goods, consisting of a plastic exterior and a liquid filler, for tariff purposes, they constitute goods consisting of two or more materials and substances. Thus, they may not be classified solely on the basis of GRI 1. The eye masks are described in GRI 2(b) which covers mixtures and combinations of materials and substances and goods consisting of two or more materials and substances. According to GRI 2(b), “The classification of goods consisting or more than one material or substance shall be according to the principles of Rule 3.” Because the ingredients of the eye masks present us with a composite good for classification purposes, we turn to GRI 3(b) which governs the classification of mixtures, composite goods consisting of different materials or made up of different components, and goods put up in sets for retail sale. Under GRI 3(b), classification of an article is to be determined on the basis of the component which gives the article its essential character. The EN’s provide that, if this rule applies, goods shall be classified as if they consisted of the material or component which gives them their essential character. EN Rule 3(b)(VIII) lists as factors to help determine the essential character of such goods the nature of the materials or components, their bulk, quantity, weight or value, and the role of a constituent material in relation to the use of the goods.

Recently, there have been several Court decisions on "essential character" for purposes of GRI 3(b). These cases have looked primarily to the role of the constituent materials or components in relation to the use of the goods to determine essential character. See, Better Home Plastics Corp. v. United States, 916 F. Supp. 1265 (CIT 1996), affirmed 119 F.3d 969 (Fed. Cir. 1997); Mita Copystar America, Inc. v. United States, 966 F. Supp. 1245 (CIT 1997), motion for rehearing and reconsideration denied, 994 F. Supp. 393 (CIT 1998), and Vista International Packaging Co., v. United States, 19 CIT 868, 890 F. Supp. 1095 (1995). See also, Pillowtex Corp. v. United States, 983 F. Supp. 188 (CIT 1997), affirmed CAFC No. 98-1227 (March 16, 1999). Based on the foregoing, we conclude that in an essential character analysis for purposes of GRI 3(b), the role of the constituent materials or components in relation to the use of the goods is generally of primary importance, but the other factors listed in EN Rule 3(b)(VIII) should also be considered, as applicable.

Before we can determine the essential character of the eye masks, we must first determine the classification of the constituent materials or components.

Heading 3924, HTSUS, provides for, among other things, household articles and toilet articles, of plastics. The ENs to subheading 39.24 provide that the heading covers such household articles of plastics as hot water bottles. The liquid contents of the masks are chemically inert mixtures which are either heated or cooled prior to use. The flexible plastic shell conforms to the wearer's face to permit maximum contact with the mask. Hot water bottles have traditionally been used by people to provide relief to sore areas. The vinyl plastic eye mask is an updated version of the traditional hot water bottle, taking advantage of modern manufacturing techniques to achieve traditional results. For the above reasons, by application of GRI 1, the vinyl plastic portion of the eye mask is classified in heading 3924, HTSUS, which provides for other household articles and toilet articles, of plastics.

The liquid mixture (water and dye) which is inside the mask is itself a composite good. Heading 2201, HTSUS, provides for potable waters consumed as a beverage. The water inside the mask, although mixed with food grade dye, is not potable in its imported condition. Water with added coloring does not fall within any of the exemplars given for types of products included in heading 2201. Further, heading 2201 does not provide for "articles of water." Thus, the contents of the mask cannot be classified in heading 2201, HTSUS. The liquid contents of the mask is a mixture of water and a dye which is classified in heading 3824, HTSUS, as residual products of the chemical or allied industries, not elsewhere specified or included. By its terms, this heading is broad enough to cover mixtures that are put up in a way that renders them fit for a particular application.

The composite goods being classified are being imported to be used as eye masks. One of the key elements of an eye mask is its ability to conform to the contours of the wearer's face. In this case, the "indispensable function" (Better Home Plastics, supra) of the article is that it can be comfortably worn on one's face. The plastic shell which contains the water/dye mixture provides the article with the flexibility necessary to enable the wearer to wrap the article around his or her face while simultaneously enjoying the benefits of the hot or cool contents. Without the plastic, the article could not function as designed. This criterion indicates that the essential character of the good is provided by the plastic component. We therefore conclude that the essential character of the product is provided by the plastic component so that, under GRI 3(b), the eye masks are classifiable in heading 3924, HTSUS.

For the above reasons, plastic, water/dye filled, eye masks are classified in subheading 3924.90.55, HTSUS, which provides for other household articles and toilet articles, of plastics, other, other. This ruling is consistent with HQs 964850, 964851 and 964852, dated April 18, 2001.

HOLDING:

Plastic, water/dye filled, eye masks are classified in subheading 3924.90.55, HTSUS, which provides for: Tableware, kitchenware, other household articles and toilet articles, of plastics, other, other.

Sincerely,

John Durant, Director

Previous Ruling Next Ruling

See also: