United States International Trade Commision Rulings And Harmonized Tariff Schedule
faqs.org  Rulings By Number  Rulings By Category  Tariff Numbers
faqs.org > Rulings and Tariffs Home > Rulings By Number > 1996 HQ Rulings > HQ 957717 - HQ 957882 > HQ 957780

Previous Ruling Next Ruling
HQ 957780

July 18, 1995

CLA-2 R:C:M 957780 MMC


TARIFF NO.: 7020.00.00

Area Director
U.S. Customs Service
Commercial Operations Division
New York Seaport
6 World Trade Center, Rm 423
New York, New York 10048

RE: IA 11/95; sand timers; EN 91.GEN (a,), GEN 3(b), 70.13; Composite good; GRI 3; Heraeus-Amersil, Inc, v. U. S., 8 CIT 329, 600 F. Supp. (1984); ?315(d), Tariff Act of 1930; Sturm, A Manual of Customs Law (1993), ?52.4.

Dear Area Director:

This is in response to your memorandum of February 22, 1995, (CLA-01-S: C: TOB: 213/NM) forwarding a request for internal advice(IA) initiated by a customs broker regarding the tariff classification of 3 models of sand timers under the Harmonized Tariff Schedule of the United States (HTSUS). A sample of each model was submitted for examination.


The articles under consideration are sand timers. The body of each consists of glass (in the shape of an hourglass) which contains sand. Model 309 (3 minute timer )and Model 706 (15 minute timer) are framed in wood. Model 209(b), a 30 second timer, has a plastic frame.

The IA applicant contends that the sand timers are classifiable under subheading 4419.00.80, HTSUS, as tableware and kitchenware, of wood: other. According to the IA applicant, this classification is based on an established and uniform practice under the Tariff Schedules of the United States (TSUS). This classification stems from the reasoning that the wood portion of the timer provides the support structure and chief value to the subject article. In the alternative, the IA applicant claims that the sand provides the essential character of the article as it is the component which provides the measurement of time.

In addition to these two possible classifications, it has been suggested that the essential character of the article is not determinable and therefore, the sand timers are classifiable under the applicable provision which appears last in the HTSUS.

The under consideration headings are:

3926 Other articles of plastics and articles of other materials of headings 3901 to 3914

4419 Tableware and kitchenware, of wood

6815 Articles of stone or of other mineral substances (including articles of peat), not elsewhere specified or included

7013 Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018)

7020 Other articles of glass

9106 Time of day recording apparatus and apparatus for measuring, recording or otherwise indicating intervals of time, with clock or watch movement or with syncronous motor ( for example, time registers, time-recorders):

What is the proper classification of the sand timers?


The classification of merchandise under the HTSUS is governed by the General Rules of Interpretation (GRI's). GRI 1, HTSUS, states, in part, that "for legal purposes, classification shall be determined according to terms of the headings and any relative section or chapter notes...."

Because the sand timers are used to measure time, we first must determine if they are classifiable under Chapter 91, HTSUS, which covers clocks and watches and parts thereof.

In understanding the language of the headings, the Explanatory Notes (ENs) of the Harmonized Commodity Description and Coding system may be utilized. The ENs, although not dispositive, or legally binding, provide a commentary on the scope of each heading of the HTSUS, and are generally indicative of the proper interpretation of the HTSUS. See, T.D. 89-90, 54 Fed. Reg. 35127, 35128 (August 23, 1989). EN GEN 91, pg.1539, states, in pertinent part, that:

...In addition to the exclusions specified in the Explanatory Note to each heading, this Chapter excludes, inter alia:

(a) Sundials and hourglasses (classified according to their constituent material)...

The ENs specifically exclude hourglasses from classification in chapter 91, HTSUS, and direct that they are classifiable according to their constituent material. These sand timers, which are smaller versions of hourglasses, consist of four different materials, plastic, sand, wood and glass. Inasmuch as the sand timers constituent materials are described by more than one heading, they cannot be classified according to GRI 1.

GRI 2(b) states, in pertinent part, that any reference in a heading to a material or substance shall be taken to include a reference to mixtures or combinations of that material or substance with other materials or substances. The classification of goods consisting of more than one material or substance shall be according to the principles of GRI 3.

GRI 3 states that when, by application of rule 2(b) or for any other reason, goods are, prima facie, classifiable under two or more headings, classification shall be effected as follows:

(a) The heading which provides the most specific description shall be preferred to headings providing a more general description. However, when two or more headings each refer to part only of the materials or substances contained in mixed or composite goods or to part only of the items in a set put up for retail sale, those headings are to be regarded as equally specific in relation to those goods, even if one of them gives a more complete or precise description of the goods.

Several of the headings under consideration describe part only of the article. Therefore, the headings are considered equally specific and GRI 3(b) must be examined.

GRI 3(b) states:

(b) Mixtures, composite goods consisting of different materials or made up of different components, and goods put up for retail sale, which cannot be classified by reference to 3(a), shall be classified as if they consisted of the material or component which gives them their essential character, insofar as this criterion is applicable.

According to EN GRI 3, pg.4, the factor which determines essential character will vary as between different kinds of goods. It may for example, be determined by the nature of the material or component, its bulk, quantity, weight or value, or by the role of a constituent material in relation to the use of the goods.

The IA applicant suggests that the wood or sand imparts the sand timers' essential character. We disagree. The wood's function of supporting the glass is no more or less important than the functioning of the glass to hold the sand or the sand to measure the time. Because none of the constituent materials constitute the articles' essential character, GRI (C) must be applied.

Heading 7013, HTSUS, which provides in pertinent part for glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes, and heading 7020, which provides for other articles of glass both describe the glass portion of the sand timers. EN 70.13, pg. 936-937, states, in pertinent part, that:

...Articles of glass combined with other materials (base metal, wood, etc.), are classified in this heading only if the glass gives the whole the character of glass articles...

The glass portion of the sand timers does not give the timer the character of a glass article. Rather, they merely contain, as part of their whole, a shaped piece of glass. Therefore, sand timers are excluded from classification under heading 7013, HTSUS.

GRI 3 (c) states:

When goods cannot be classified by reference to 3(a) or 3(b), they shall be classified under the heading which occurs last in numerical order among those which equally merit consideration.

The heading which appears last in numerical order among those which equally merit consideration, is heading 7020, HTSUS. Therefore, the article is classifiable under heading 7020, HTSUS, as other articles of glass.

Finally, we note that IA applicant suggests that an established and uniform practice, has developed under the TSUS with respect to sand timers. The U. S. Courts have long recognized that the Customs Service has and does establish uniform practices in regard to the treatment of goods coming into this country. A uniform practice may be established, inter alia, by actual uniform treatment of goods by the various ports. See, Heraeus-Amersil, Inc, v. United States, 8 CIT 329, 600 F. Supp. (1984) and ?315(d), Tariff Act of 1930, as amended. The existence of an established and uniform practice must be shown by positive evidence. Strum, A Manual of Customs Law (1993), ?52.4. The IA applicant has not provided any positive evidence of an established and uniform practice.

Furthermore, classification of goods under the HTSUS, which became effective as the tariff law of the United States on January 1, 1989, is governed by the General Rules of Interpretation, which provide in pertinent part, that "classification shall be determined according to the terms of the headings and any relative section or chapter notes, and provided such headings or notes do not otherwise require, according to the remaining GRIs." The classification of the instant sand timers results from a change made by Congress in enacting a new tariff schedule, the HTSUS.

For the foregoing reasons we find that the sand timers are classifiable under heading 7020, HTSUS, as other articles of glass with a general column one duty rate of 6.3% ad valorem.

This decision should be mailed by your office to the internal advice requester no later than 60 days from the date of this letter. On that date, the Office of Regulations and Rulings will take steps to make the decision available to Customs personnel via the Customs Rulings Module in ACS and the public via the Diskette Subscription Service, Freedom of Information Act and other public access channels.


John Durant, Director
Commercial Rulings

Previous Ruling Next Ruling

See also: