Patent application number | Description | Published |
20080314030 | Method for Operating a Nitrogen Oxide Storage Catalytic Converter in a Motor Vechicle with Consideration of Regional Fuel Qualities - The fuel qualities for vehicles differ, for example, in Europe on a regional basis. This applies in particular to the sulphur content of the fuel. If vehicles with modern lean engines or with diesel engines which are equipped with nitrogen oxide storage-type catalytic converters in order to reduce the nitrogen oxide content in their exhaust gas pass through regions with a sulphur content in the fuel which is above the sulphur content which is specified for the vehicle, the engine controller will correspondingly frequently initiate desulphurization of the storage-type catalytic converter after the vehicle has been refuelled with this fuel. Any desulphurization entails an increased level of fuel consumption and greater ageing of the catalytic converter. It is proposed to avoid these adverse effects in that in lean motors the engine controller switches to stoichiometric operation in such a case, and in a diesel engine said engine controller prevents the desulphurization. The information about the region in which the vehicle is moving at a particular time can be transmitted to the engine controller by a navigation system. | 12-25-2008 |
20090145112 | Method for Regenerating Nitrogen Oxide Storage Catalysts - Nitrogen oxide storage catalytic converters for purifying the exhaust gas of lean-burn engines are periodically regenerated by switching the engine from lean-burn mode to rich-burn mode. After regeneration has taken place, the engine is switched back to lean-burn mode. At this time, rich exhaust gas is still flowing in the exhaust line from the engine to the catalytic converter, which rich exhaust gas is ejected via the catalytic converter into the environment by the following, lean exhaust gas. This leads to brief emissions peaks of the rich exhaust gas constituents and impairs the level of exhaust gas cleaning which can be obtained. In order to solve said problem, it is proposed to create oxidizing conditions by injecting air upstream of the storage catalytic converter, so that the rich exhaust gas constituents still flowing in the exhaust line upstream of the storage catalytic converter can be converted at the storage catalytic converter to form non-harmful products. The proposed method can lead to a considerable improvement in exhaust gas purification in particular in the case of catalytic converters which are already impaired in terms of their storage capacity through aging, and which must be regenerated significantly more frequently than fresh catalytic converters. | 06-11-2009 |
20090151329 | Method for regeneration a nitrogen oxide storage catalyst - To remove the nitrogen oxides from the exhaust gas from lean-burn engines, these engines are equipped with a nitrogen oxide storage catalyst, which has to be regenerated frequently by the engine being briefly switched to rich-burn mode. The regeneration is usually initiated when the nitrogen oxide concentration downstream of the catalyst rises above a permissible value. In this context, there is a risk of the bed temperature of the catalyst during and after regeneration being pushed into a range with incipient thermal desorption of the nitrogen oxides on account of the heat which is released during the conversion of the nitrogen oxides by the reducing constituents of the exhaust gas. This can lead to increased nitrogen oxide emission both during the regeneration itself and after the engine has been switched back to lean-burn mode. To eliminate this problem, it is proposed to divide the rich-burn mode into two rich pulses which follow one another in time, the first rich pulse being of shorter duration than the second rich pulse. | 06-18-2009 |
20100037597 | EXHAUST EMISSION CONTROL SYSTEM FOR LEAN ENGINES AND METHOD FOR OPERATING THE SYSTEM - An emission control system for the cleaning of the exhaust gases of a lean burn engine with two or more cylinders comprises a first exhaust leg for the exhaust gases of a first group of cylinders and a second exhaust leg for the exhaust gases of a second group of cylinders. A nitrogen oxide storage catalyst is arranged in each exhaust leg. The two exhaust legs are combined downstream of the storage catalysts at a confluence to form a common exhaust leg. The common exhaust leg contains an SCR catalyst. The first and second groups of cylinders are each supplied alternately in periodic intervals with lean and rich air/fuel mixtures. Lean or rich exhaust gases are thus obtained in the combustion in the cylinders and released into the corresponding exhaust legs. Lean and rich exhaust gases are adjusted with respect to one another so as to result in a lean exhaust gas after the combination of the exhaust gases in the common exhaust leg. The regeneration of the storage catalysts may result in the formation of ammonia, which is stored by the SCR catalyst and reacted with nitrogen oxides which pass through the storage catalysts in an unwanted manner during the storage phases. | 02-18-2010 |
20100055012 | NITROGEN OXIDE STORAGE CATALYST FEATURING A REDUCED DESULFURIZATION TEMPERATURE - Nitrogen oxide storage catalysts are used to remove nitrogen oxides from the exhaust gas of internal combustion engines operated predominantly under lean burn conditions. When these catalysts are used in diesel vehicles, the increased sulfur content in the fuel during operation results in poisoning of the catalyst, which is reversible at high temperatures under reduced exhaust gas conditions. In the case of conventional nitrogen oxide storage catalysts, temperatures of more than 600° C. have to be obtained for desulfurization. This is not always possible in diesel vehicles with a nitrogen oxide storage catalyst in the underbody area. | 03-04-2010 |
20100064665 | METHOD AND DESULFURIZING NITROGEN OXIDE STORAGE CATALYSTS IN THE EXHAUST GAS SYSTEM OF A LEAN MIX ENGINE - Lean burn engines require an exhaust gas system comprising nitrogen oxide storage catalysts for removal of nitrogen oxides from their exhaust gases. When the lean burn engine is operated with a sulphur-containing exhaust gas, the storage catalysts have to be desulphurized from time to time. During the desulphurization, there is the risk of high pollutant emissions. These emissions can be reduced when the cylinders of the lean burn engine are combined in two groups which release their exhaust gas to two assigned exhaust legs, in each of which is arranged at least one nitrogen oxide storage catalyst. The two exhaust legs are combined beyond the storage catalysts to form a common exhaust leg which contains a catalyst which possesses a three-way function under stoichiometric conditions. The two nitrogen oxide storage catalysts are desulphurized offset in time with respect to one another. While rich exhaust gas at a high temperature flows through one storage catalyst for desulphurization, lean exhaust gas flows through the second storage catalyst, in such a way that the combined exhaust gas is of stoichiometric composition over the entire desulphurization period. Under the stoichiometric conditions, the catalyst with three-way function is capable of converting hydrocarbons, carbon monoxide and nitrogen oxides to harmless components. | 03-18-2010 |
20100095658 | CATALYST SYSTEM AND USE THEREOF - Soot filters for removing soot from the exhaust gas of lean-burn engines become blocked with progressive operating duration on account of the deposition of soot, and must therefore be regenerated at regular intervals. It has been found that reliable operation of the soot filter is possible only if an active regeneration is carried out from time to time by increasing the exhaust-gas temperature to the soot ignition temperature. For this purpose, an oxidation catalytic converter is usually arranged upstream of the soot filter, and the exhaust-gas temperature is increased by means of the catalytic combustion of additionally injected fuel. Here, the oxidation catalytic converter is subjected to high temperature loading and therefore ages very quickly. It has surprisingly been found that the ageing of the oxidation catalytic converter can be slowed if said oxidation catalytic converter is split into at least two separate catalytic converters and the distance between said separate catalytic converters is 2 to 30 mm. | 04-22-2010 |
20100101210 | Method for Regenerating Soot Filters in the Exhaust Gas System of a Lean Mix Engine, and Exhaust Gas System Therefor - To adhere to legal exhaust-gas regulations, the exhaust gases of a lean-burn engine must be freed from soot particles and nitrogen oxides. It is proposed that the cylinders of the lean-burn engine be divided into two groups which discharge their exhaust gases into two associated exhaust lines which each comprise a soot filter and which are merged at an opening-in point into a common exhaust line. The common exhaust line comprises the catalytic converter for the removal of the nitrogen oxides. By regenerating the two soot filters at different times, the exhaust-gas temperature in the common exhaust line is limited to a mean temperature between the exhaust-gas temperature of normal operation and that of regeneration operation, and the catalytic converter for the removal of the nitrogen oxides is preserved. | 04-29-2010 |
20100233051 | NITROGEN OXIDE STORAGE CATALYST FEATURING A REDUCED DESULFURIZATION TEMPERATURE - Nitrogen oxide storage catalysts are used to remove nitrogen oxides from the exhaust gas of internal combustion engines operated predominantly under lean burn conditions. When these catalysts are used in diesel vehicles, the increased sulfur content in the fuel during operation results in poisoning of the catalyst, which is reversible at high temperatures under reduced exhaust gas conditions. In the case of conventional nitrogen oxide storage catalysts, temperatures of more than 600° C. have to be obtained for desulfurization. This is not always possible in diesel vehicles with a nitrogen oxide storage catalyst in the underbody area. | 09-16-2010 |
20110000189 | DENOX OF DIESEL ENGINE EXHAUST GASES USING A TEMPERATURE-CONTROLLED PRECATALYST FOR PROVIDING NO2 IN ACCORDANCE WITH THE REQUIREMENTS - The adherence to future legally obligatory exhaust gas limit values for diesel vehicles in Europe, North America and Japan requires not only the removal of particles but also effective removal of nitrogen oxides from the exhaust gas (‘deNOx’). The ‘active SCR process’ is the preferred method for this. The nitrogen oxide conversions achieved by means of this process are particularly high when an optimal NO | 01-06-2011 |
20110094207 | METHOD FOR CLEANING INTERNAL COMBUSTION ENGINE EXHAUST GASES - Described is a method for cleaning the exhaust gases of internal combustion engines, which method is suitable for reducing harmful gases and particle emissions. Here, the exhaust gas to be cleaned is conducted, under operating conditions, with a discontinuous profile of the air ratio λ across a wall-flow filter substrate which comprises a catalytically active coating containing one storage material. The storage material is suitable for temporarily storing one or more exhaust-gas components under certain operating conditions and releasing said exhaust-gas components again in a targeted fashion in the event of a suitable change in the operating conditions. The coating is configured such that the component has a gradient of the storage material concentration and/or of the total coating amount, with the highest concentration of the storage material in the longitudinal direction of the component being present on the inflow side. At least 60% by weight of the storage material in relation to its total amount is present in the walls between inflow and outflow ducts, and at least 50% by weight of the storage material in relation to its total amount is present in a first, inflow-side zone in the wall-flow filter substrate. | 04-28-2011 |
20110258982 | METHOD FOR THE ON-BOARD REACTIVATION OF THERMALLY AGED NITROGEN OXIDE STORAGE CATALYSTS IN MOTOR VEHICLES HAVING AN INTERNAL COMBUSTION ENGINE OPERATED PREDOMINANTLY UNDER LEAN CONDITIONS - Nitrogen oxide storage catalysts are used to remove the nitrogen oxides present in the lean exhaust gas of lean-burn engines. Storage catalysts are thermally aged by high temperatures. Ageing is due to sintering of the catalytically active noble metal components of the catalyst and to formation of compounds of the storage components with the support materials. According to the invention, the formation of compounds of the storage materials can be largely reversed by treatment of the storage material with a gas mixture containing carbon dioxide, optionally water vapor and optionally nitrogen oxides at temperatures in the range from 200° C. to 950° C., preferably from 300° C. to 700° C. The reactivation can be carried out under emission-neutral conditions directly in the vehicle during driving operation by setting of suitable exhaust gas conditions and regulating the air/fuel ratio. | 10-27-2011 |
20120148464 | EXHAUST-GAS AFTERTREATMENT SYSTEM WITH CATALYTICALLY ACTIVE WALL-FLOW FILTER WITH STORAGE FUNCTION UPSTREAM OF CATALYTIC CONVERTER WITH IDENTICAL STORAGE FUNCTION - The present invention relates to an exhaust-gas aftertreatment system which comprises a preferably catalytically active particle filter (wall-flow filter) which is followed in turn by a throughflow monolith (flow-through monolith) which is preferably provided with a catalytically active function. Both components have the same storage functions for gaseous substances present in the exhaust gas of internal combustion engines. The system is suitable in particular for the simultaneous removal of particles and pollutants from the exhaust gas of both predominantly lean-operated internal combustion engines and also of internal combustion engines operated predominantly with a stoichiometric air/fuel mixture. Likewise described is a process for the production and the use of such a system for exhaust-gas aftertreatment. | 06-14-2012 |
20130202507 | METHOD FOR TREATING NOX IN EXHAUST GAS AND SYSTEM THEREFORE - The present invention relates to a method for the treatment of an exhaust gas comprising NOx, wherein the method comprises the step of subjecting the exhaust gas to an exhaust gas treatment system comprising, in order of the exhaust stream: (a) a first NOx storage catalytic converter ( | 08-08-2013 |
20140056789 | DENOX OF DIESEL ENGINE EXHAUST GASES USING A TEMPERATURE-CONTROLLED PRECATALYST FOR PROVIDING NO2 IN ACCORDANCE WITH THE REQUIREMENTS - A process which solves the problem of supplying NO | 02-27-2014 |