Patent application number | Description | Published |
20090283532 | INTEGRATED FILTER HOUSING - An oil filter fitting | 11-19-2009 |
20110049267 | VARIABLE FLUID FLOW IN AIR-OPERATED TWO COMPONENT GUN APPLICATOR - A two component spray gun with low/high flow rates allows the operator to spray in confined areas at lower flow without having to change the mix module. The lower flow reduces undesirable “spray back” and will also help reduce material waste. Pneumatic piston | 03-03-2011 |
20110062251 | QUARTER TURN SIDE SEAL ASSEMBLY - The side seal assembly consists of three main components: a hardened and precision ground side seal | 03-17-2011 |
20110062702 | HOSE MANIFOLD WITH INTEGRATED FILTRATION AND SHUT-OFF CHECK VALVES - The hose manifold integrates fluid filtration using cylindrical mesh screens and incorporates a check valve backup fluid shut-off system into the hose manifold. Two threaded check valve assemblies (one assembly on the iso side, one on the resin side) with slip on cylindrical filter screens are assembled into the hose manifold to filter the iso and resin fluids. When the hose manifold is assembled to the main fluid section of the foam applicator, pin features within the main fluid section open the spring loaded check balls in the hose manifold to allow for full fluid flow to the main fluid section. | 03-17-2011 |
20110068201 | BUILD-UP MINIMIZING SPRAY GUN TIP - The advantage of this construction is that the time between manual cleanings of the frontal area of the gun can be lengthened or eliminated. The spray gun utilizes high pressure air forced through thin openings and that surround the spray tip, to eliminate the eddies in the air flow around the frontal area of the spray gun. One concentric thin opening surrounds the spray tip and is directed parallel to the direction of spray. With a second concentric thin opening, the air is directed at an angle of about 55 degrees relative to the axis or direction of spray. | 03-24-2011 |
20110073680 | QUICK ATTACHING FLUID HEAD - The fluid section or head ( | 03-31-2011 |
20120262159 | PUMP LINE LINEAR POSITION SENSING ASSEMBLY - A two-piece collar ( | 10-18-2012 |
20130112073 | LUBE PUMP TELESCOPING ENCLOSURE - Enclosure ( | 05-09-2013 |
20140124050 | POUR SPOUT ADAPTER ASSEMBLY FOR PUMPING SYSTEM - A pour spout adapter comprises a housing, a collar and a threaded engagement. The housing has a sealed bore for receiving a tube. The collar has an internal bore coupled to the housing at a rotatable connection so as to permit a tube to extend from the sealed bore through the collar. The threaded engagement is disposed on the internal bore to receive a threaded pour spout. | 05-08-2014 |