Patent application number | Description | Published |
20080257540 | Multipart frac head with replaceable components - A multipart frac head with replaceable components permits the frac head to be refurbished in the field. In one embodiment, a bottom leg of the multipart frac head is replaceable. In another embodiment, inlet ports of the frac head are also replaceable. | 10-23-2008 |
20090008100 | Fixed-point packoff element with primary seal test capability - A fixed-point packoff element for a full-bore pressure isolation tool supports a primary seal and a test seal to permit the primary seal to be tested by injecting test fluid through a side port of a tubing head spool before the pressure isolation tool is rigged up for a well stimulation procedure. | 01-08-2009 |
20090038791 | CUP TOOL WITH THREE-PART PACKOFF FOR A HIGH PRESSURE MANDREL - A cup tool for use with a high-pressure mandrel of a wellhead isolation tool has a three-part packoff assembly that slides over a cup tool tube from an unset position to a set position. The three-part packoff assembly includes an elastomeric cup, a rigid alignment ring located above the elastomeric cup and an elastomeric packoff element located above the rigid alignment ring. The rigid alignment ring helps ensure that the elastomeric cup remains correctly aligned in a casing or tubing that is not straight, is out of round or is washed, and helps ensure that the elastomeric packoff achieves a high-pressure seal in the set position, even under adverse downhole conditions. | 02-12-2009 |
20090091131 | HIGH-PRESSURE THREADED UNION WITH METAL-TO-METAL SEAL, AND METAL RING GASKET FOR SAME - A metal ring gasket provides a high-pressure temperature tolerant metal-to-metal seal between subcomponents of a threaded union. The metal ring gasket is received in an annular cavity formed between mating surfaces of the subcomponents of the threaded union. The metal ring gasket is capable of maintaining a fluid seal even at very high temperatures resulting from direct exposure to fire. At high fluid pressures the metal ring gasket is energized because hoop stress induced by the fluid pressure forces the metal ring gasket into tighter contact with the subcomponents of the threaded union. | 04-09-2009 |
20090114870 | TWO-PART BACK CAP FOR A PLUG VALVE AND PLUG VALVES INCORPORATING SAME - A two-part back cap for a plug valve includes a back cap seal body and a back cap retainer nut. The back cap retainer nut secures the back cap seal body within the plug valve and securely supports the back cap seal body. A gap between an outer periphery of the back cap retainer nut and the back cap seal body permits the back cap seal body to flex and expand with a plug valve body of the plug valve. This ensures that the back cap seals are not stressed and a longer service life results. | 05-07-2009 |
20090145593 | Snubber Spool With Detachable Base Plates - A snubber spool with detachable base plates includes a base flange with a plurality of spaced-apart load pins received in through bores in the base plates. Tie plates with bores for receiving top ends of the load pins are mounted over the base plates in an offset orientation with respect to the base plates. A load nut that engages a pin thread on an outer sidewall of the snubber spool is tightened down on the tie plates to lock the base plates to the snubber spool. | 06-11-2009 |
20100001219 | TWO-PART BACK CAP FOR A PLUG VALVE AND PLUG VALVES INCORPORATING SAME - A two-part back cap for a plug valve includes a back cap seal body and a back cap retainer nut. The back cap retainer nut secures the back cap seal body within the plug valve and securely supports the back cap seal body. A gap between an outer periphery of the back cap retainer nut and the back cap seal body permits the back cap seal body to flex and expand with a plug valve body of the plug valve. This ensures that the back cap seals are not stressed and a longer service life results. | 01-07-2010 |
20100096852 | HIGH-PRESSURE THREADED UNION WITH METAL-TO-METAL SEAL, AND METAL RING GASKET FOR SAME - A metal ring gasket provides a high-pressure temperature tolerant metal-to-metal seal between subcomponents of a threaded union. The metal ring gasket is received in an annular cavity formed between mating surfaces of the subcomponents of the threaded union. The metal ring gasket is capable of maintaining a fluid seal even at very high temperatures resulting from direct exposure to fire. At high fluid pressures the metal ring gasket is energized because hoop stress induced by the fluid pressure forces the metal ring gasket into tighter contact with the subcomponents of the threaded union. | 04-22-2010 |
20100171060 | TWO-PART BACK CAP FOR A PLUG VALVE AND PLUG VALVES INCORPORATING SAME - A two-part back cap for a plug valve includes a back cap seal body and a back cap retainer nut. The back cap retainer nut secures the back cap seal body within the plug valve and securely supports the back cap seal body. A gap between an outer periphery of the back cap retainer nut and the back cap seal body permits the back cap seal body to flex and expand with a plug valve body of the plug valve. This ensures that the back cap seals are not stressed and a longer service life results. | 07-08-2010 |
20110048698 | MULTIPART FRAC HEAD WITH REPLACEABLE COMPONENTS - A multipart frac head with removable components permits the frac head to be refurbished in the field. A bottom leg and inlet ports of the multipart frac head can be replaced. | 03-03-2011 |
20110175349 | HIGH-PRESSURE THREADED UNION WITH METAL-TO-METAL SEAL, AND METAL RING GASKET FOR SAME - A metal ring gasket provides a high-pressure temperature tolerant metal-to-metal seal between subcomponents of a threaded union. The metal ring gasket is received in an annular cavity formed between mating surfaces of the subcomponents of the threaded union. The metal ring gasket is capable of maintaining a fluid seal even at very high temperatures resulting from direct exposure to fire. At high fluid pressures the metal ring gasket is energized because hoop stress induced by the fluid pressure forces the metal ring gasket into tighter contact with the subcomponents of the threaded union. | 07-21-2011 |
20120152525 | LOW PROFILE, HIGH CAPACITY BALL INJECTOR - An injector spool supports a plurality of ball injector assemblies having respective ball cartridges adapted to load one frac ball at a time into a ball chamber of a ball launcher of the respective ball injector assemblies to provide a low profile, high capacity ball injector. | 06-21-2012 |
20120211219 | HORIZONTAL FRAC BALL INJECTOR - An injector spool supports a plurality of ball injector assemblies having respective ball cartridges adapted to load one frac ball at a time into a ball chamber of a ball launcher of the respective ball injector assemblies to provide a horizontal frac ball injector adapted to be connected to a frac head by frac iron. | 08-23-2012 |
20120279717 | CONTROLLED APERTURE BALL DROP - A controlled aperture ball drop includes a ball cartridge that is mounted to a frac head or a high pressure fluid conduit. The ball cartridge houses a ball rail having a bottom end that forms an aperture with an inner periphery of the ball cartridge through which frac balls of a frac ball stack supported by the ball rail are sequentially dropped from the frac ball stack as a size of the aperture is increased by an aperture controller operatively connected to the ball rail. | 11-08-2012 |
20130075079 | FRAC HEAD WITH SACRIFICIAL WASH RING - A frac head with a sacrificial wash ring located above a mixing chamber protects a frac head body from erosion caused by abrasive frac fluids pumped through the frac head. | 03-28-2013 |
20140096948 | APERTURE BALL DROP - A controlled aperture ball drop includes a ball cartridge that is mounted to a frac head or a high pressure fluid conduit. The ball cartridge houses a ball rail having a bottom end that forms an aperture with an inner periphery of the ball cartridge through which frac balls of a frac ball stack supported by the ball rail are sequentially dropped from the frac ball stack as a size of the aperture is increased by an aperture controller operatively connected to the ball rail. | 04-10-2014 |
20140166265 | BALL DROP WELLHEAD CONTROL APPARATUS - A ball drop wellhead control apparatus provides a control ball between one of a frac ball drop and a frac ball injector used to drop frac balls into a frac fluid stream being pumped into a subterranean well to ensure that only frac balls intended to be dropped reach the frac fluid stream. | 06-19-2014 |
20140196883 | MODULAR BALL DROP - A modular ball drop made up of two or more identical ball drop modules that are vertically stacked in a desired number. Each ball drop module can drop one or more frac balls into a fluid stream being pumped into a well. | 07-17-2014 |
20150034296 | LOW PROFILE, HIGH CAPACITY BALL INJECTOR - An injector spool supports a plurality of ball injector assemblies having respective ball cartridges adapted to load one frac ball at a time into a ball chamber of a ball launcher of the respective ball injector assemblies to provide a low profile, high capacity ball injector. | 02-05-2015 |
20150047826 | HORIZONTAL FRAC BALL INJECTOR - An injector spool supports a plurality of ball injector assemblies having respective ball cartridges adapted to load one frac ball at a time into a ball chamber of a ball launcher of the respective ball injector assemblies to provide a horizontal frac ball injector adapted to be connected to a frac head by frac iron. | 02-19-2015 |