| APS Technology, Inc. Patent applications |
| Patent application number | Title | Published |
|---|
| 20120111559 | METHOD FOR FRACTURING AND ANALYZING AN EARTHEN FORMATION SURROUNDING A WELL BORE - A method of micro-fracturing in a well bore to define the stress field and fracture system for the purpose of optimizing subsequent hydraulic fracturing well completion operations. During or subsequent to drilling of the well bore, a down hole imager takes measurements that allow the operator to select appropriate zones of the well bore for optional micro-fracture testing. The micro-fracturing testing is conducted by stopping the flow of drilling mud and expanding one, or preferably two packers incorporated into a micro-fracture module of the drill string. The pressure in the isolated zone between the packers (or below the packer if one packer is used) is pressurized until fracture occurs. The trend in the pressure in the isolated zone of the bore hole is measured during the test to assess information about the fracturing of the bore hole. After micro-fracture testing, or upon completion of the drilling, the same zone of the bore hole is again scanned by the imager and the natural beak-outs or pre- and post-micro-fracture testing images are analyzed to ascertain further information about the formation. Micro-fracture testing is repeated over different zones of the well bore as the drilling proceeds or subsequent to the drilling operation and the information from these tests is used to optimize the major fracturing in the completion phase of the drilling. | 05-10-2012 |
| 20120103689 | APPARATUS AND METHOD FOR DETERMINING AXIAL FORCES ON A DRILL STRING DURING UNDERGROUND DRILLING - An apparatus for determining the weight on a drill bit and axial forces along a drill string drilling though an earthen formation. The apparatus comprising an LVDT incorporated into a torsional bearing of a magneto-rheological damping system such that the LVDT senses the relative displacement and accelerations between a bearing mandrel portion and a bearing casing portion of the torsional damper. The LVDT is calibrated with respect to a spring in the damping system that resists relative motion between the bearing mandrel and bearing casing such that the output of the LVDT can be transformed into the force associated with the weight on the drill bit, and the same LVDT accelerations combined with the mass distribution along the drill string to determine axial stresses. | 05-03-2012 |
| 20120085581 | SYSTEM AND METHOD FOR DAMPING VIBRATION IN A DRILL STRING USING A MAGNETORHEOLOGICAL DAMPER - A system for damping vibration in a drill string can include a magnetorheological fluid valve assembly having a supply of a magnetorheological fluid. A remanent magnetic field is induced in the valve during operation that can be used to provide the magnetic field for operating the valve so as to eliminate the need to energize the coils except temporarily when changing the amount of damping required The current to be supplied to the coil for inducing a desired magnetic field in the valve is determined based on the limiting hysteresis curve of the valve and the history of the magnetization of the value using a binary search methodology. The history of the magnetization of the valve is expressed as a series of sets of current and it resulting magnetization at which the current experienced a reversal compared to prior values of the current. | 04-12-2012 |
| 20110291334 | System And Method For Damping Vibration In A Drill String - A system for damping vibration in a drill string can include a valve assembly having a supply of a fluid, a first member, and a second member capable of moving in relation to first member in response to vibration of the drill bit. The first and second members define a first and a second chamber for holding the fluid. Fluid can flow between the first and second chambers in response to the movement of the second member in relation to the first member. The valve assembly can also include a coil or a valve for varying a resistance of the fluid to flow between the first and second chambers. | 12-01-2011 |
| 20110186353 | System and Method for Monitoring and Controlling Underground Drilling - A system and method for monitoring underground drilling in which vibration is monitored by creating a model of the drill string using finite element techniques or finite difference techniques and (i) predicting vibration by inputting real time values of operating parameters into the model, and then adjusting the model to agree with measured vibration data, (ii) predicting the weight on bit and drill string and mud motor speeds at which resonance will occur, as well as when stick-slip will occur, so that the operator can avoid operating regimes that will result in high vibration, (iii) determining vibration and torque levels along the length of the drill string based on the measured vibration and torque at one or more locations, (iv) determining the remaining life of critical components of the drill string based on the history of the vibration to which the components have been subjected, and (v) determining the optimum drilling parameters that will avoid excessive vibration of the drill string. | 08-04-2011 |
| 20110024188 | APPARATUS FOR MEASURING BENDING ON A DRILL BIT OPERATING IN A WELL - An apparatus for measuring the bending on a drill bit operating down hole in a well may comprise at least three pockets circumferentially spaced equidistantly around the drill collar of the drill string to which the drill bit is attached. Four strain gauges are equidistantly circumferentially spaced around each of the pockets so as to form first and second sets of strain gauges. The strain gauges in the first set are connected into one Wheatstone bridge while the gauges in the second set are connected in a second bridge. Each of the strain gauges that are oriented similarly within each of the pockets are connected in series within a single leg of a bridge so that the output voltage of the bridge is unaffected by bending in the drill string. The output of first bridge is used to determine the bending on the drill bit. Further, an apparatus for measuring the bending, weight, and torque on a drill bit operating down hole in a well may comprise at least three pockets circumferentially spaced equidistantly around the drill collar of the drill string to which the drill bit is attached with twelve strain gauges that are equidistantly circumferentially spaced around each of the pockets so as to form first and second sets of strain gauges. The arrangement of the twelve strain gauges allow for a bending on bit measurement that cancels out the affects of the weight on bit and torque on bit. | 02-03-2011 |
| 20100224410 | SYSTEM AND METHOD FOR DAMPING VIBRATION IN A DRILL STRING USING A MAGNETORHEOLOGICAL DAMPER - A system for damping vibration in a drill string can include a magnetorheological fluid valve assembly having a supply of a magnetorheological fluid, a first member, and a second member capable of moving in relation to first member in response to vibration of the drill bit. The first and second members define a first and a second chamber for holding the fluid. Fluid can flow between the first and second chambers in response to the movement of the second member in relation to the first member. The valve assembly can also include a coil for inducing a magnetic field that alters the resistance of the magnetorheological fluid to flow between the first and second chambers, thereby increasing the damping provided by the valve. A remanent magnetic field is induced in one or more components of the magnetorheological fluid valve during operation that can be used to provide the magnetic field for operating the valve so as to eliminate the need to energize the coils during operation except temporarily when changing the amount of damping required, thereby eliminating the need for a turbine alternator power the magnetorheological fluid valve. A demagnetization cycle can be used to reduce the remanent magnetic field when necessary. | 09-09-2010 |
| 20100214121 | SYNCHRONIZED TELEMETRY FROM A ROTATING ELEMENT - A top drive assembly may comprise a drive motor that provides rotational torque to a drill string for driving the drill string into the earth. A sensor and a transmitter may be located on a section of the drill string or on a device that can be incorporated into a drill string. The sensor may take measurements of the drill string that is rotating during the drilling operation. If the sensor is located near the top drive assembly, the sensor may take measurements of an upper portion of the rotating drill string during the drilling operation. The transmitter may wirelessly transmit the sensor information in real-time to a coordinator or main radio. The transmitter may also be located near the top drive assembly and during the drilling operation, may transmit from the rotating drill string while located in a position above the earth's surface. | 08-26-2010 |
| 20100008188 | SYSTEM AND METHOD FOR ACQUIRING INFORMATION DURING UNDERGROUND DRILLING OPERATIONS - A preferred method for acquiring information during an underground drilling operation includes providing a sensing device capable of acquiring information concerning the underground drilling operation from a down-hole location on a selective basis in response to an input from the surface, and drilling for a first period of time. The preferred method also includes sending the input to the sensing device after drilling for the first period of time, and drilling during a second period of time while acquiring the information using the sensing device. | 01-14-2010 |
| 20090008151 | Rotary Steerable Motor System for Underground Drilling - A preferred embodiment of a system for rotating and guiding a drill bit in an underground bore includes a drilling motor and a drive shaft coupled to drilling motor so that drill bit can be rotated by the drilling motor. The system further includes a guidance module having an actuating arm movable between an extended position wherein the actuating arm can contact a surface of the bore and thereby exert a force on the housing of the guidance module, and a retracted position. | 01-08-2009 |
| 20080315471 | System And Method For Damping Vibration In A Drill String - A system for damping vibration in a drill string can include a valve assembly having a supply of a fluid, a first member, and a second member capable of moving in relation to first member in response to vibration of the drill bit. The first and second members define a first and a second chamber for holding the fluid. Fluid can flow between the first and second chambers in response to the movement of the second member in relation to the first member. The valve assembly can also include a coil or a valve for varying a resistance of the fluid to flow between the first and second chambers. | 12-25-2008 |
