Patent application title: Necktie Knot
Inventors:
David Jerome Lowe (Tampa, FL, US)
IPC8 Class: AA41D2506FI
USPC Class:
2148
Class name: Body garments neckties knot structure
Publication date: 2015-04-30
Patent application number: 20150113702
Abstract:
The DJLowe Tie Knot is a method of tying the necktie in a 21st
Century conventional style that gives the effect of a miniature necktie.
The overall length of the three visible tie faces range from 3.0-4.5
inches, however, these dimensions can run greater or smaller (+/-). The
three parts that make up the knot are called: The Primary Tie Face, the
Secondary Tie Face and the Horizontal Tie Face. The completion of the
knot will result in all three faces being equal in dimension, or may have
a (+/-) tolerance in the finished product of the DJLowe Tie knot. The
knot can be tied by using a regular standard necktie, or is available in
the pre-assemble wardrobe finish. See diagram for details.Claims:
1. The DJLowe Tie Knot promotes safety, health, infection control
awareness, a new elegant brand for the 21.sup.st century and beyond. This
classic contemporary design allows tie wearers to revisit the old stored
away tie bins or closet racks, and transform the traditional tie knots
and ties into a contemporary finished design called the DJLowe Tie Knot.
The objective of the knot is to reduce or shorten the length of the
Primary Tie Face and the Secondary Tie Face to significantly shorter
dimensions. The knot remains visible allowing the Secondary Tie Face to
project from behind the Primary Tie Face having the same and equal
measurements. Together all three faces are visible, and form a
contemporary elegant showcase. This unique, short and savvy necktie Knot
features the visible faces of the tie in a miniature form. The visible
portions displayed are the two ends of the necktie, and the Horizontal
Ties Face. The Horizontal Ties Face is a cross section found above the
upper end of the Primary Tie Face. The Horizontal Tie Face is also
proportional to the other two component measurements in width, which
range from 3.0-4.5 inches (+/-) tolerance. However, these component
measurements can be adjusted for personal individual preference. The
DJLowe Tie Knot is also available as a separate assembled unit with
special securing devices. The secret of the DJLowe Tie lies in the
finished look of the Knot, whether in the form of the separate assembled
unit, or by making the knot from scratch. The Secondary Tie Face can have
an extended dimension that out measures the main tie face. Be aware that
tying the knot can ruin the necktie, however, this is more likely with
multiple usages and with the usage of fasteners such as tiepins, broaches
etc. The necktie should be maneuvered delicately to achieve the desired
goal. However, the traditional standard necktie in Section A facilitates
multiple usage without having to cut or destroy the necktie. The DJLowe
Ties Knot assemblies described in Section B (Alternative Versions) are
wardrobe finished, made for quick and easy installation and use. See
section specifications and diagrams. The Section B (Alternative Versions)
diagrams show the complete Classic Contemporary wardrobe tie design with
two features: B-1 is designed with the use of the clip and adjuster
mechanism; and B-2 is designed with the use of a fabric elastic
restraint. Both Tie Knots provide the ability to adjust the neck size to
fit wearer's neck and collar for quick and easy installation.Description:
WORDS AND PHRASES USED IN THE NOMENCLATURE CONTEXT OF THE DJLOWE TIE KNOT
[0001] Intersection Point--The crossing point where the knot begins
[0002] Primary Tie Face--The broad working end of the neck tie
[0003] Secondary Tie Face--The narrow non-working end of the neck tie
[0004] Horizontal Tie Face--A small section above the primary tie face that is horizontal
[0005] Tie Arch--The Tie fabric that lies around the neck area
[0006] Neck Area--Encircles the collar, (Z) left shoulder collar area, (Y) back center point of the collar and (X) right shoulder collar area
[0007] Right Column--The tie section that lies above the Intersection point on the primary tie face
[0008] Left Column--The tie section that lies above the Intersection point on the secondary tie face
DIRECTIONS FOR CREATING THE DJLOWE KNOT
[0009] FIG. 1: Secure all primary buttons on the front of the shirt, excluding the collar buttons. Place shirt collar in an upward position. Place the extended necktie around the neck and allow the Primary Tie Face to cross over the Secondary Tie Face as seen in FIG. 1. Adjust the Primary Tie Face in a 2:1 ratio from the Intersection Point to the chin or neck.
[0010] FIG. 2: Clamp the Intersection Point with index and thumb fingers. Move Primary Tie Face behind the Intersection Point upward and through the opening of the two columns, facing upward and in line with chin.
[0011] FIG. 3: Move the Primary Tie Face downward and rotate around the first column on the Intersection Point.
[0012] FIG. 4: Form a cylindrical curvature around the second column in a 360 degree rotation pattern.
[0013] FIG. 5: Wrap the Primary Tie Face individually around the two columns separately at the Intersection Point.
[0014] FIG. 6: Hold the Intersection Point in place with the same hand, and wrap Primary Tie Face with the other hand in one sweep, from one side to the other forming the Horizontal Tie Face.
[0015] FIG. 7: Reposition the hand in a cup-form to allow for easy movements, and hold Primary Tie Face, and pull inward and upward behind the Intersection Point.
[0016] FIG. 8: Pull down the Primary Tie Face between the Horizontal Tie Face and the Intersection Point until slightly tightened. Make minor adjustments as desired.
[0017] FIG. 9: Adjust the knot to specifications: At this point, the Primary Tie Face should be adjusted between 3.0-4.5 inches in length. The Secondary Tie Face should be between 3.0-4.5 inches in length, measuring from the lower tip of the Primary Tie Face to the lower tip of the Secondary Tie Face. The Horizontal tie face should range between 3.0-4.5 inches in width.
[0018] FIG. 10: Hold the DJLowe Tie Knot with a cupped hand towards the front of the neck. Use the other hand to pull and hold the tie from the back of the neck (Y point), allowing the DJLowe Tie Knot to fit into the collar area securely.
[0019] FIG. 11: Hold Tie Arch firmly while keeping the knot in place. Clamp Tie Arch with thumb and index fingers at positions Z or X. Fold excessive Tie Arch fabric in the opposite direction around collar.
[0020] FIG. 12: Finally, fold the shirt or blouse collar down into position. The knot is complete at this point. The three surfaces that are uniquely visible to the DJLowe Tie Knot are The Primary Tie Face, Secondary Tie Face and the Horizontal Tie Face.
[0021] The Knot is complete at this point as seen in FIG. 12 Minor adjustments can be made for personal preference. If desired, accessories such as a tie pin or broach can be used on the Primary Tie Face of the DJLowe Tie Knot.
[0022] The DJLowe Tie Knot
User Contributions:
Comment about this patent or add new information about this topic: