[ Usenet FAQs | Web FAQs | Documents | RFC Index ]
    Search the FAQ Archives

Part01 - Part02 - Part03 - Part04 - Part05 - Part06 - Part07 - Part08 - Part09 - Part10 - Part11 - Part12 - Part13 - Part14 - Single Page

Top Document: Win95 FAQ Part 2 of 14: Re/Un/Installation
Previous Document: 2.10. Things to do before re-installing to ensure good re-installation
Next Document: 2.12. Things to try before giving up


2.11. Top ten re-installation mistakes


   10. Inserting the 13th disk before reading the "Things to try before
   re-installing" section
   
   9. Restoring your old Windows 3.1 backup on top of your re-installed
   Win95 (again? Shame on you)
   
   8. Not reading the Installation part of the FAQ over again before
   re-installing
   
   7. Forgetting to uncompress your DriveSpace drive before reinstalling
   
   (It's best to make a separate compressed volume, and keep your Win95
   directory OFF it)
   
   6. Forgetting to erase the corrupt Registry before re-installing
   
   5. Using that BOOTLEG CD-ROM to re-install from (Didn't you learn the
   first time?)
   
   4. Re-installing the Win 3.1 program that made you re-install Win95
   
   3. Forgetting to remove old garbage from system.ini, config.sys,
   autoexec.bat
   
   2. Ignoring the Installation part of the FAQ, which might've
   prevented the need to re-install
   
   1. Not backing up your system after you re-installed Win95
   



Top Document: Win95 FAQ Part 2 of 14: Re/Un/Installation
Previous Document: 2.10. Things to do before re-installing to ensure good re-installation
Next Document: 2.12. Things to try before giving up

Part01 - Part02 - Part03 - Part04 - Part05 - Part06 - Part07 - Part08 - Part09 - Part10 - Part11 - Part12 - Part13 - Part14 - Single Page


[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
gordonf@intouch.bc.ca

Last Update October 22 2009 @ 05:35 AM

Some parts © 2009 Advameg, Inc.