(5.7) syslog: cant symlink

This usually means an intermediate directory doesn't exist.  Usually
"ctlinnd renumber" clears this problem, but doesn't remove the cause.

This is usually an indication of some larger problem.  Often it means
that you have opted to use MMAP on an operating system (like Ultrix)
that doesn't have a working mmap() function.  However, this would only
be the cause if you ignored the Install.ms *and* part 2 of this FAQ.
So, obviously, this isn't the cause :-).

Another cause might be that "ctlinnd renumber" fails because of fields
in the active being too narrow. See #5.17 for how to deal with this.

Top Document: INN FAQ Part 5/9: Other error messages and what they mean
Previous Document: (5.6) syslog msg: ME cant sendto CCreader bytes 4 No such file or directory
Next Document: (5.8) syslog: cant read Connection reset by peer

Part1 - Part2 - Part3 - Part4 - Part5 - Part6 - Part7 - Part8 - Part9 - Single Page

[ Usenet FAQs | Web FAQs | Documents | RFC Index ]

Send corrections/additions to the FAQ Maintainer:
hwr@pilhuhn.de (Heiko W.Rupp)

Last Update October 22 2009 @ 05:25 AM