8.3. Print problems

In this section, we will discuss what you can do as a user when something goes wrong. We won't discuss any problems that have to do with the daemon-part of the printing service, as that is a task for system administrators.

8.3.1. Wrong file

If you print the wrong file, the job may be canceled using the command lprm jobID, where jobID is in the form printername-printjobnumber (get it from information displayed by lpq). This will work when other jobs are waiting to be printed in this printer's queue. However, you have to be really quick if you are the only one using this printer, since jobs are usually spooled and send to the printer in only seconds. Once they arrive on the printer, it is too late to remove jobs using Linux tools.

8.3.2. My print hasn't come out

Use the lpq command and see if you can spot your job:


elly:~>lpq
Printer: lp@blob
 Queue: 2 printable jobs
 Server: pid 29998 active
 Unspooler: pid 29999 active
 Status: waiting for subserver to exit at 09:43:20.699
 Rank   Owner/ID             Class Job Files          Size Time
1      elly@blob+997           A   997 (STDIN)         129 09:42:54
2      elly@blob+22            A    22 /etc/profile    917 09:43:20

Lots of printers have web interfaces these days, which can display status information by typing the printer's IP address in your web browser:

Figure 8-1. Printer Status through web interface

If your job ID is not there and not on the printer, contact your system administrator. If your job ID is listed in the output, check that the printer is currently printing. If so, just wait, your job will get done in due time.

If the printer is not printing, check that it has paper, check the physical connections to both electricity and data network. If that's okay, the printer may need restarting. Ask your system admin for advice.

In the case of a network printer, try printing from another host. If the printer is reachable from your own host (see Chapter 10 for the ping utility), you may try to put the formatted file on it, like file.ps in case of a PostScript printer, using an FTP client. If that works, your print system is misconfigured. If it doesn't work, maybe the printer doesn't understand the format you are feeding it.

The GNU/Linux Printing site contains more tips and tricks.