Navistar 9200i



Table of contents:
Navistar 9200i 1999 recalls
CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE
99V350000INTERNATIONAL TRUCK AND ENGINEfrom 06/21/1999 to 07/20/1999V (Vehicle)25412/27/1999MFRINTERNATIONAL TRUCK & ENGINE CORPORATION12/14/199912/30/1999571121
Defect SummaryVehicle description: heavy duty trucks. the check valves in the air brake system on these vehicles do not meet the requirements of fmvss no. 121, air brake systems.
Consequence SummaryIncreased braking effort may be required.
Corrective SummaryDealers will install new check valves on the vehicles involved.
NotesInternational recall no. 99512.owner notification began december 27, 1999. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact navistar at 1-800-448-7825. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
SERVICE BRAKES, HYDRAULIC - ANTILOCK
00V022000INTERNATIONAL TRUCK AND ENGINEfrom 03/29/1999 to 05/31/1999V (Vehicle)82901/31/2000MFRINTERNATIONAL TRUCK & ENGINE CORPORATION01/24/200002/03/2000
Defect SummaryVehicle description: heavy duty trucks. the antilock traction relay valves were incorrectly assembled by the supplier. an extra check valve was installed which will not allow the traction control system to function properly.
Consequence SummaryThe rear brakes can be applied automatically during a traction event and not release until the air system pressure is depleted.
Corrective SummaryDealers will inspect these vehicles and all antilock traction relay valves found defective will be replaced.
NotesInternational recall no. 00501.owner notification began january 31, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
STEERING - WHEEL AND HANDLE BAR
99V208000INTERNATIONAL TRUCK AND ENGINEfrom 06/01/1999 to 07/22/1999V (Vehicle)16708/12/1999MFRINTERNATIONAL TRUCK & ENGINE CORPORATION08/03/199908/05/1999
Defect SummaryVehicle description: heavy duty trucks equipped with steering columns supplied by douglas autotec. the steering columns on these vehicles may have a defective or dislocated weld.
Consequence SummaryIf the steering column broke, a complete loss of steering control could occur, increasing the risk of a crash.
Corrective SummaryDealers will replace the lower steering shaft assembly.
NotesOwner notification began august 12, 1999. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact navistar at 1-800-448-7825.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).
Navistar 9200i 1999 bulletins
BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
STEERING
IK-050003808/19/201110041405Ready2011-09-30
IK-050003808/19/201110041405Navistar: steering goes into a shimmy after hitting a bump. *rm2011-09-30