Mack Cl 2006
Model Cl made in 2006 by Mack got 2 recalls as well as 5 service bulletins. Technical service bulletines regarding electrical system and engine and engine cooling. There were some recalls concerningsteering and trailer hitches.
Model 2006
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STEERING | ||||||||||||||||
| 05V348000 | MACK TRUCKS, INC | from 04/11/2005 to 04/26/2005 | V (Vehicle) | 12 | 08/18/2005 | MFR | MACK TRUCKS, INC | 07/28/2005 | 08/02/2005 | |||||||
| Defect Summary | On certain heavy duty class 8 trucks, the bolts that attach the steering gear to the frame may not be tightened properly. | |||||||||||||||
| Consequence Summary | This may affect the performance of the steering which may result in a vehicle crash. | |||||||||||||||
| Corrective Summary | Dealers will check the torque on the bolts that attach the steering gear to the frame and tighten the bolts properly. the recall began august 18, 2005. owners may contact mack at 1-800-528-6586. | |||||||||||||||
| Notes | Mack trucks recall no. sc0302. customers may also contact the national highway traffic safety administration | |||||||||||||||
| TRAILER HITCHES - FIFTH WHEEL ASSEMBLY | ||||||||||||||||
| 07V497000 | MACK TRUCKS, INC | from 01/09/2006 to 06/29/2007 | V (Vehicle) | 950 | 01/28/2008 | MFR | MACK TRUCKS, INC | 10/23/2007 | 10/23/2007 | |||||||
| Defect Summary | On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. an over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. | |||||||||||||||
| Consequence Summary | There is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. the recall began on january 28, 2008. owners may contact mack trucks at 1-800-528-6586. | |||||||||||||||
| Notes | Mack trucks recall no. sc0331.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ELECTRICAL SYSTEM - BATTERY | |||||
| 607 | 04/26/2006 | 10020380 | Missing cable boot on positive battery terminal. mack cl, cv and ctp model chassis. *tt | 09/25/2006 | |
| ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE | |||||
| FSB-214-024 | 01/01/2011 | 10040051 | Ready | 08/15/2011 | |
| FSB-214-024 | 01/01/2011 | 10040051 | Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm | 08/15/2011 | |
| SEATS | |||||
| FSB-851-007 | 09/01/2010 | 10034967 | Mack truck: rear trim panel wear plate, installation. model chassis equipped with high back or mid back seats, the seat back can rub and wear through the rear trim panel. does not apply to chassis equipped with sears brad seats. models c | 02/02/2011 | |
| SEATS - BARRIERS | |||||
| FSB-851-007 | 09/01/2010 | 10034967 | Mack truck: rear trim panel wear plate, installation. model chassis equipped with high back or mid back seats, the seat back can rub and wear through the rear trim panel. does not apply to chassis equipped with sears brad seats. models c | 02/02/2011 | |