Mack Cl 2000
Model Cl made in 2000 by Mack got 4 recalls as well as 2 service bulletins. Technical service bulletines regarding engine and engine cooling. There were some recalls concerningservice brakes, air and steering.
Model 2000
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SERVICE BRAKES, AIR - CONTROLS | ||||||||||||||||
01V189004 | MACK TRUCKS, INCORPORATED | from 09/19/2000 to 03/30/2001 | V (Vehicle) | 8268 | 11/16/2001 | MFR | MACK TRUCKS, INC | 08/01/2001 | 08/01/2001 | |||||||
Defect Summary | Vehicle description: heavy duty trucks equipped with certain meritor-wabco brake system two and four port relay valves. the valve may stick open when a high-pressure application is released. | |||||||||||||||
Consequence Summary | When the valve sticks open, it can result in a total loss of air from either the service or the park brake system. the driver may lose braking ability under a service application, possibly resulting in a vehicle crash. | |||||||||||||||
Corrective Summary | Dealers will replace these valves. owner notification began november 16, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011 or meritor wabco at 800-535-5560. | |||||||||||||||
Notes | Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
STEERING - LINKAGES - TIE ROD ASSEMBLY | ||||||||||||||||
02V037006 | MACK TRUCKS, INCORPORATED | from 06/14/1999 to 10/31/2000 | V (Vehicle) | 2050 | 12/27/2002 | MFR | MACK TRUCKS, INC | 08/15/2002 | 09/06/2002 | |||||||
Defect Summary | On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications. | |||||||||||||||
Consequence Summary | If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash. | |||||||||||||||
Corrective Summary | Dealers will replace the ball socket assemblies. this campaign will supersede nhtsa recall nos. 01v-140-005 (mack sc0270) and 00v-246-103 (mack sc0262). owner notification began december 27, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337. | |||||||||||||||
Notes | Mack truck recall no. sco276.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
SUSPENSION - REAR | ||||||||||||||||
02V061002 | MACK TRUCKS, INCORPORATED | from 10/01/1998 to 01/16/2002 | V (Vehicle) | 213 | 04/22/2002 | MFR | MACK TRUCKS, INC | 03/21/2002 | 03/26/2002 | |||||||
Defect Summary | On certain heavy duty trucks equipped with dana spicer tandem drive axle models ds463, an undersized attachment weld may fracture without warning. | |||||||||||||||
Consequence Summary | The loss of this attachment to the vehicle chassis can adversely affect vehicle handling or driver control. | |||||||||||||||
Corrective Summary | The dealers will remove the suspect bracket, inspect the axle housing, and reweld the bracket to the axle housing. owner notification began april 22, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610-709-3337. | |||||||||||||||
Notes | Mack truck recall no. sco273. consumers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-327-4236. | |||||||||||||||
VEHICLE SPEED CONTROL - ACCELERATOR PEDAL | ||||||||||||||||
00V230003 | MACK TRUCKS, INCORPORATED | from 02/01/1999 to 08/31/2000 | V (Vehicle) | 45866 | 12/12/2000 | MFR | MACK TRUCKS, INC | 10/04/2000 | 11/01/2000 | |||||||
Defect Summary | Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. the return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs. | |||||||||||||||
Consequence Summary | This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed. | |||||||||||||||
Notes | Owner notification began december 13, 2000.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1-610-709-3011. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE | |||||
FSB-214-024 | 01/01/2011 | 10040051 | Ready | 08/15/2011 | |
FSB-214-024 | 01/01/2011 | 10040051 | Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm | 08/15/2011 |