Ford B700 1989
Model B700 made in 1989 by Ford got 3 consumer complains there are 3 investigations as well as 2 recalls. Consumer complaints with reference, among others things, to service brakes, hydraulic, steering. The car had some investigations: service brakes, hydraulic, steering. There were some recalls concerningelectrical system, steering.
Model 1989
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ELECTRICAL SYSTEM - BATTERY | ||||||||||||||||
94V056000 | FORD MOTOR COMPANY | from 09/01/1986 to 03/01/1994 | V (Vehicle) | 3660 | 07/19/1994 | MFR | FORD MOTOR COMPANY | 03/26/1994 | 04/01/1994 | |||||||
Defect Summary | System: electrical system; battery. vehicle description: medium duty school bus chassis equipped with hydraulic brakes, tilt hoods, 5.9l, 6.6l or 7.6l diesel engines or 6.1l or 7.0l gasoline engines and originally sold or currently registered in connecticut, illinois, indiana, maine, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania ,rhode island, vermont, and wisconsin. the battery power junction block mounted on the right fender apron, which serves as an electrical connection point for several engine compartment systems, is susceptible to road splash. the terminals at the junction block can experience corrosion and can fracture, causing loss of electrical power and engine shutdown. | |||||||||||||||
Consequence Summary | Engine shutdown, loss of power steering assist, or loss of hydraulic brake boost can occur which may result in loss of vehicle control and an accident. | |||||||||||||||
Corrective Summary | Dealers will replace the junction box, main power terminal the starter or starter relay and terminals at the existing junction block. the wiring of the hydraulic brake circuit will also be modified by bypassing the junction block. the new terminals will be made from an alloy material more resistant to salt corrosion. | |||||||||||||||
Notes | Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free ofcharge or the remedy does not correct the defect or noncompliance, please contact ford service center at 1-800-392-3673. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. | |||||||||||||||
STEERING - RACK AND PINION | ||||||||||||||||
94V118000 | FORD MOTOR COMPANY | from 11/01/1987 to 09/01/1992 | V (Vehicle) | 12700 | 09/09/1994 | ODI | FORD MOTOR COMPANY | 06/27/1994 | 06/29/1994 | |||||||
Defect Summary | The steering gears have an improperly machined snap ring groove. this can cause a fracture of the snap ring with subsequent damage to the recirculating ball guide tube. also, the o-ring seal in vehicles built after february 1988 does not meet specifications and is inadequate, causing interior leakage around the o-ring / glide ring seal in the steering gear. | |||||||||||||||
Consequence Summary | The fracture of the snap ring results in increasing deterioration of the ability to turn the vehicle to the right. the driver would experience increased steering efforts or a crunchy feeling at the steering wheel. the inadequate o-ring seal causes momentary reductions in power steering assist at low speed and certain left turn maneuvers. both conditions result in decreased steering ability. | |||||||||||||||
Corrective Summary | Dealers will rebuild the steering gear. if a broken snap ring is found during rebuilding, the steering gear will be replaced with a remanufactured unit. | |||||||||||||||
Notes | System: steering: gear: rack and pinion.vehicle description: school bus chassis.note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and freeof charge or the remedy does not correct the defect or noncompliance, please contact the ford service center at 1-800-392-3673. also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
SERVICE BRAKES, HYDRAULIC | ||||||
EA90036 | FORD MOTOR COMPANY | 07/06/1990 | 07/06/1991 | BRAKE CHAMBER FAILURE | ||
There is no summary currently available | ||||||
STEERING | ||||||
PE91002 | FORD MOTOR COMPANY | 10/03/1990 | 01/31/1991 | STEERING LOCKUP | ||
There is no summary currently available | ||||||
EA91014 | FORD MOTOR COMPANY | 01/31/1991 | 08/27/1991 | STEERING LOCKUP | 91V126000 | |
There is no summary currently available |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS | |||
10/20/1999 | 1 | 09/01/1997 | |
The brake line to the right front wheel and the line to the rear brakes went through a common bracket along the frame. inside this bracket, completely undetectable, the 2 lines had rusted... both failed at the same time. i saw the fluid leak, but knew i had lost both braking systems, front and rear, so i continued looking for another leak. to my surprise, both lines made contact inside this bolt-on strap connector and had rusted simultaneously. all warning lights and buzzers worked properly. when the brake pedal hit the floor, the power steering system did not have enough reserve pressure to allow me to continue turning. heading downhill and making a hard left turn with very little clearance from my house, i nearly hit my house before coming to a stop. many years of double-bottom 160k lb. gasoline tanker driving and a sound mechanical knowledge hastened my reaction time and i flipped the emergency brake lever and releaved the pressure from the rear spring brakes, which brought me to a stop. with both front and rear brakes gone at the same time, and with all buzzers and lights sending me warnings, still the emergency braking system failed to apply the rear brakes without manually moving the parking brake lever. this is the most serious problem i have ever incurred! a bus load of children would be in desparate danger if this happened to one of the many simular buses still transporting children today. visual inspection of the lines would not show this problem. the bracket would need to be physically removed in order to inspect for rust. that does not happen! i am replacing all lines on my bus... i no longer trust any connector underneath this otherwise very solid vehicle. | |||
STEERING - RACK AND PINION | |||
Two of the buses were recalled both are still leaking after the work had been performed. one of the vin # 1fdpj75pokva59531. *ak | |||
09/09/1994 | 2 | ||
Fleet 1990 to 1993. midway ford 9v4118. bendix will not send the part to ford therefore the dealership can not honor the recall. tt |