Dodge Wagon 1999



Table of contents:
Dodge Wagon 1999 bulletins
BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM
0800600REV12/29/2000080600618049Subject regarding wire splice repairs. *sb2001-04-03
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM
25029810/23/1998602881Subject regarding i/m ( inspection maintenance ) testing - obd ii carb readiness monitor information. *yc1999-01-20
EQUIPMENT - ELECTRICAL - RADIO/TAPE DECK/CD ETC.
08169804/17/1998600862Information on installation of radio transmitting equipment. *ak1999-11-12
STRUCTURE - BODY
23429809/05/1998602446Hiss or whistle type windnoise can be heard coming from the a-pillar area. *yc1999-11-18
23439809/18/1998602447This bulletin is intended to assist in identifying water leak entry points past the dual cargo door seals by highlighting areas where leaks are likely to occur based on the experience gained during the development of the vehicle. *yc1998-11-05
Dodge Wagon 1999 Consumer Complaints
Fail datemilesoccurencesPurchase date
SUSPENSION - FRONT - CONTROL ARM
07/31/2001903042
 I have had tie rod ends replaced on my 1999 durango twice. once at 23883 miles (7/31/01) and again at 45534 miles and ball joints replaced at 45534(9/03/2004. both times the handling of the vehicle became very unstable. i wrote to dodge and called with the only response that i needed to have a qualified dodge dealer do the work, which i had, both times. my concern is with all the front end issues i've had, will i have to replace someting again in another 20,000 miles and is the vehicle safe?*ak
SUSPENSION - FRONT - CONTROL ARM - LOWER BALL JOINT
07/31/2001903042
 I have had tie rod ends replaced on my 1999 durango twice. once at 23883 miles (7/31/01) and again at 45534 miles and ball joints replaced at 45534(9/03/2004. both times the handling of the vehicle became very unstable. i wrote to dodge and called with the only response that i needed to have a qualified dodge dealer do the work, which i had, both times. my concern is with all the front end issues i've had, will i have to replace someting again in another 20,000 miles and is the vehicle safe?*ak
SUSPENSION - FRONT - CONTROL ARM - UPPER BALL JOINT
12/05/2004208/21/2001
 I have a 1999 dodge durango. i have seen your recent request for chrysler to recall the durango because of the upper ball joints. the recall request was 2000-2004 durangos and dakotas. i have had to replace the ball joints and front axals in my truck twice . this is the same body style as 2000 thr 2004 . why are they not requesting recall on the 1999 durangos to? *jb
07/31/2001903042
 I have had tie rod ends replaced on my 1999 durango twice. once at 23883 miles (7/31/01) and again at 45534 miles and ball joints replaced at 45534(9/03/2004. both times the handling of the vehicle became very unstable. i wrote to dodge and called with the only response that i needed to have a qualified dodge dealer do the work, which i had, both times. my concern is with all the front end issues i've had, will i have to replace someting again in another 20,000 miles and is the vehicle safe?*ak