Dodge D300 1972



Table of contents:
Dodge D300 1972 recalls
CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
72V193000CHRYSLER CORPORATIONfrom 08/01/1971 to 02/01/1972V (Vehicle)4100009/11/1972MFRCHRYSLER GROUP LLC07/25/197210/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesCampaign no 091t.conventional light-duty truck.possibility that brake pedalshaft attaching screw and nut were improperly torqued.short shaft used withautomatic transmission brake pedal could shift out of pedal support causinginability to properly apply brakes.(correct by inspecting and retorquingnuts).
STRUCTURE
71V202000CHRYSLER CORPORATIONfrom 07/01/1971 to 11/01/1971V (Vehicle)2969611/19/1971MFRCHRYSLER GROUP LLC11/10/197110/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesChrysler campaign no 082t.with sweptline cargo box trucks. possibility thatbolts holding sweptline cargo box to frame ar e suspected of not being properlytightened; looseness of bolt s could allow box to shift on frame.(correct byinspecting,retightening bolts bolts where necessary, and adding jam nuts. )
SUSPENSION
75V013000TRAVEL EQUIPMENT CORP. V (Vehicle)11702/12/1975MFRCHRYSLER GROUP LLC01/27/197510/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesMultipurpose passenger (ambulance) dodge d-300 van.possibility that amalposition of an oversize jounce bumper contact shim which can causemomentary, front brake failure after completion of a sharp turn to left orright.this failure can be caused by contact of the inner brake caliper withan improperly positioned oversize shim.welded outboard of the spring pocketon the front suspension crossmember, undercertain loading conditions.thiscontact will depress the caliper, forcing brake fluid in the cylinder back tothe mastercylinder reservoir.(correct by inspecting and replacing shim withproperly positioned shim).
WHEELS - CENTER SECTION
72V004000CHRYSLER CORPORATIONfrom 12/01/1971 to 12/01/1971V (Vehicle)97101/12/1972MFRCHRYSLER GROUP LLC01/11/197210/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesChrysler campaign no 085t.trucks.possibility that die mark in hub of 16 x 51/2 wheel may cause hub failure after extended mileage.(correct by inspectingand replacing where necessary.)