Dodge D200 1969



Table of contents:
Dodge D200 1969 recalls
CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM
69V092000CHRYSLER CORPORATION V (Vehicle)148507/30/1969MFRCHRYSLER GROUP LLC07/10/196910/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesPossibility that brake booster may fail upon hard brake application due toinadequate retention of front and rear halves of booster housing.this couldresult in complete loss of service brake system.(correct by inspecting andreplacing parts when necessary.)
STEERING
68V099000CHRYSLER CORPORATION V (Vehicle)54810/14/1968MFRCHRYSLER GROUP LLC10/18/196810/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesPossibility rear spring clip (u-bolt) nuts on s-200, d-300; w-200 and w-300 models, and front clip on all others listed were improperly heat treated.could cause eventual breakage of nuts.if multiple fractures occur, possible loss of steering control could result.(correct by replacing spring clip nuts.)
VEHICLE SPEED CONTROL
69V043000CHRYSLER CORPORATION V (Vehicle)920103/25/1969MFRCHRYSLER GROUP LLC04/09/196910/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesPossibility of inadequate clamping force on steering shift tube set screws.this could allow shift tube to slip causing interference between shift tubelever and steering gear coupling which could result in loss of steeringcontrol.also, possibility of interference of retaining clips securingthrottle control rod and shift control rod, which could result in transmissionshifting into neutral during acceleration.(correct by inspecting andrepairing when necessary.)
WHEELS
68V106000CHRYSLER CORPORATION V (Vehicle)1910/28/1968MFRCHRYSLER GROUP LLC11/05/196810/12/1979
Defect Summary
Consequence Summary
Corrective Summary
NotesPossibility one or more wheels have bolt holes with chamfers that do not match chamfers on wheel nuts.extended operation in this condition could cause wheel nuts to work loose and result in an unsafe vehicle.(correct by inspecting and replacing wheels where necessary.)